SCAME surface junction box 85x85x37 IP54
To carry out the proper electrical installation you may need junction box for wall mounting. You can use it aesthetically hide the connection and separation circuits. High-quality and very durable unit easy to install as it only requires attachment to the plaster with 2 screws. The box may be useful for you in every room – perfectly protected from the effects of dust and water(IP rating IP54), designed from durable material. Do not hesitate to check other junction boxes from our offer.
Scabox installation boxes are produced in different sizes. With glands: snap IP54, IP55 and bolted without glands: IP66, and with a transparent lid. Scame boxes are used to install the cables outside the TN-S network.
Scabomet installation boxes series, are characterised by very easy installation.
Mounting box Rated voltage: 400V / 50Hz Protection: IP54 Protection class: II (insulated) Board size: 85 x 85 x 37 Reference standards: EN 60670-1 Test hot wire: 650°C
The IP Code, International Protection Marking, IEC standard 60529, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The equivalent British standard is EN 60529.
1st digit: Solid particle protection
5 Dust protected - Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment.
2nd digit: Liquid ingress protection
4 Splashing of water - Water splashing against the enclosure from any direction shall have no harmful effect.
SCAME surface junction box 85x85x37 IP54 specification
||H37mm x L85mm W85mm
SCAME surface junction box 85x85x37 IP54 package includes
1 x 85x85x37 junction box