MiBoxer 2.4G rainbow remote (RGB+CCT) S2
The newest MiBoxer Rainbow remote is an LED wall-mounted radio remote panel that can control a single zone of RGB+CCT lighting. The Mi-Light S2 is a wireless round wall panel that allows dimming and brightening as well as control of the light temperature and change to any light colour for RGBCCT installations. The device is intended for surface mounting. The wall panel is powered by two 1.5V AAA batteries.
Application for installation:
RGB+CCT - multicolour + dual white
Characteristic features of the Mi-Light wall panel - S2
Switching ON and switching OFF connected LED lighting
Dimming and brightening of connected LED lighting
Light colour temperature control
Immediate reduction in brightness (night mode)
Features of the Mi-Light wall panel - S2
One zone to use
Power through two AAA batteries
Radio range up to 30 meters
A gentle backlight of the diodes showing the work of the device
Construction adapted for surface mounting
Small dimensions and aesthetic workmanship
24 months warranty
The radio connectivity of the wall panel allows for wireless control at a level of 30 meters in the open area. Communication-based on 2.4GHz frequency ensures stable and synchronized operation of the LED lighting used. The products cooperating with the S2 wall-mounted panel can be found in the compatible MiBoxer products tab.
Wireless communication - radio route
Wireless radio route which characterizes these wall panels provides comfortable control of LED lighting within 30 meters in an area not exposed to interference. Increasing the radio signal in the installation is possible by using several receiving devices assigned to one zone. These devices are characterized by the transmission of the received signal to the next device, thus increasing the control range of the LED installation (Distance between the receivers cannot be greater than 30m).
Night mode - an immediate reduction of light intensity
The night mode function allows you to instantly reduce the LED lighting intensity with a one-touch field. This model is ideally suited to rooms with total dusk, preventing us from blinding the connected lighting. In addition, the controller blocks the change in the brightness intensity level in night mode, making it permanent and not exposed to sudden changes.
MiBoxer 2.4G rainbow remote (RGB+CCT) S2 specification
| Application | For RGB+CCT installations (multicolour + dual white) |
| Maximum output current | Depends on the receiver used |
| Powering the transmitter | 2 x 1.5V AAA battery |
| Number of supported zones/channels | 1 zone |
| Communication method | radio |
| Frequency of radio transmission | 2400-2483.5MHz |
| The range of radio communication | Up to 30 meters in the open area |
| Signal modulation | GFSK |
| Transmission type | one-way |
| Return to previous settings when power is off | No |
| Cooperation with receivers | please see the compatible MiBoxer products tab |
| Power consumption in operating mode | 6dBm |
| Power consumption in standby mode | 10uA |
| Touch buttons | Yes |
| The working temperature of the wall panel | -20℃ -:- 60℃ |
| The degree of tightness | IP20 |
| The dimensions of the device | ⌀80mm*17mm |
| Installation of a wall panel | surface mounting |
| Colour | White, Black, Grey |
| Declarations | RoHS, CE, UKCA |
| Warranty | 24 months |
MiBoxer 2.4G rainbow remote (RGB+CCT) S2 package includes
1 x round RGB+CCT remote control
1 x user manual
Leave a review