Mi-Light 4 in 1 smart LED controller LS1
LS1 4 in 1 (15A) radio LED receiver is a product that enables wireless LED lighting control. The device is designed to be used in a variety of LED installations. Depending on the operating mode, the unit can work in monochrome and multicolour (RGB and RGB+W). Communication is done by radio and the basic radio range is 30 meters in the open, with the possibility of increasing it by retransmitting the signal.
One of the most important features of this system is the ability to handle almost every installation (MONO/CCT/RGB/RGBW) with the help of one remote control. Up to now, for mixed installations in monochrome and RGB environments, separate sets have to be used for each. Using the remote control with LS1 receiver, you can control almost any installation by programming the LS1 receiver.
Remote needs to be purchased separately. For compatible products please see Table 1.
Application for installation:
MONO - one colour
CCT - with a variable colour temperature
RGB - multicolour
RGB+W - multicoloured with extra white
RGB + CCT - multicolour with variable colour temperature (in this case two separate receivers are required)
Features of the Mi-Light 4 in 1 smart LED controller LS1
Application for MONO/CCT/RGB/RGB+W installations
Built-in display that monitors the parameters of the receiver
Radio signal extension (signal retransmission)
Shared synchronization of devices in the installation
Input voltage range 12-24V DC.
Wireless communication with remote control
Maximum current carrying capacity 15A
Works with Wi-Fi (optional)
Possibility of creating a very large LED installation
The type of communication that connects the transmitter to the receiver is via radio. A signal based on 2400-2483.5 MHz frequencies allows for 30 meters wireless operation in the open area. With more devices (receivers), we can create LEDs based on unlimited coverage, thanks to signal retransmission technology. The condition of this work is to place another receiver within 30 meters. The Mi-Light products that work with the LS1 receiver are listed in the following Table 1.
Table 1. Compatible devices with Mi-Light 4 in 1 smart LED controller LS1
|Product code||Product name|
||Mi-Light 2.4GHz remote control for LED tracklight FUT090
||Mi-Light WiFi iBox smart light iBox1
||Mi-Light WiFi controller iBox2
Automatic synchronisation - precision in operation
When more than one receiver is controlled by one transmitting device, the installation is synchronized during operation without causing delays during operation.
Transmission - transmitting radio signal
Increasing the radio signal in the installation is possible with the use of several receivers. These devices are characterized by the transmission of the received signal to the next device, thereby increasing the range of control of the LED installation (distance between receivers cannot be more than 30m).
Mi-Light 4 in 1 smart LED controller LS1 specification
|Input/output voltage of the receiver
||12V DC or 24V DC
|Maximum output current
|Number of outputs of the receiver
||5 outputs - common anode
||up to 30 meters in an open area (possibility of signal extension by signal retransmission)
||-20 – 60℃
|Input connector (power supply)
||Screw terminals for bare wires and DC socket
|Output connector (terminal)
||Screw terminals for bare wires
||See ,,Product description table 1″
||L138 x W35 x H23
Mi-Light 4 in 1 smart LED controller LS1 package includes
1 x Mi-Light radio receiver LS1
1 x User Manual (English)