MiBoxer waterproof dual white LED controller (2.4G) FUT035S-P
LED receiver - CCT - 12-24V 12A - IP66 - FUT035S-P, a small device used to control LED CCT lighting. The device has been designed to allow you to change the colour temperature of the connected CCT LED strip by using an appropriate dimmer. Communication of such a device is carried out via radio, it is through it that the receiver communicates with the transmitting device. Access to the receiver can also be obtained via the WiFi network by using the appropriate module. The key feature of the receiver is its hermetic IP66 housing. This receiver works with devices of the Mi-light series.
The "Waterproof" series focuses primarily on safety. Relative to the standard series, the receiver - has a hermetic IP66 sealed housing, which allows the receiver to be used outdoors. Recommended especially for outdoor lighting (e.g. LED garden lighting or various types of gazebos)
Application for installation:
CCT - with variable colour temperature
Features of the FUT035S-P - Mi-Light receiver
Application for tapes with variable CCT colour temperature
Wireless communication with the dimming device
Obtaining colour temperature and brightness control
Maximum current carrying capacity 12A
Frequency selection in two ranges - 500Hz/8kHz
Input/output voltage range 12-24V DC
Built-in diode signalling the work of the receiver
Hermetic IP66 housing
Cooperation with Wi-Fi network (additional option)
Possibility of using several receivers for one zone
Very small sizes
The connectivity of the Mi-Light series receivers is characterized by wireless communication via radio with a control device such as a remote control or a wall panel. The range of such a connection is 30 meters in the open area, provided that it is not exposed to various types of interference. In addition, devices from this series synchronize the signal with each other and transmit it to subsequent receivers, thus ensuring a stable connection above the declared value.
The basic communication between the receiver and the transmitter is by radio. The radio signal is based on a frequency of 2.4 GHz, the range of which is 30 meters in an open area, but when using more luminaires, this signal is extended thanks to the signal retransmission technology. The condition for such work is to locate another receiving device (LED luminaire) within 30 meters. It is also worth noting that the devices are synchronized together, which does not cause delays due to the lack of use of cables during installation. When there are more receivers in the installation controlled by one transmitting device, then the installation synchronizes together during operation, without causing any delays in the operation of the devices.
