Mi-Light 4-zone CCT adjust smart panel B2

Mi-Light 4-Zone CCT adjust smart panel B2

CCT - Mi-Light wall dimmer is a wireless wall panel that allows you to manage the brightness and colour temperature of a CCT for variable colour devices (eg CCT receiver/bulb or devices included in the compatible MiBoxer products tab). The dimmer allows individual access for each zone, which can be controlled via the glass panel. The device is designed for surface mounting. The wall panel is powered by two 1.5V AAA batteries.

Application for installation: CCT - with variable colour temperature

Characteristic features of the Mi-Light wall panel - B2

Switching on or off the connected LED illumination

Enables and disables all zones simultaneously

Dimming and brightening of the connected LED lighting

Dimming and brightening of all zones simultaneously

Colour temperature change for all/individual zones

Immediate reduction of brightness (night mode)

Turn off the light with a 60-second delay

Features of the Mi-Light wall panel - B2

Four zones to use

Powered by two AAA batteries

Radio range up to 30 meters

A glass panel on the wall

Possibility of extension of the installation

Sound signalling

Gentle LED illumination showing the work of the device

Construction suitable for surface mounting

24 months warranty

The wireless connectivity of the wall panel enables wireless control of up to 30 meters in open areas. Communication based on 2.4GHz frequency provides stable and synchronised operation of the LED lighting used. Products that work with the B2 wall panel can be found in the compatible MiBoxer products tab.

Wall panel design - small touch, big possibilities

Mi-Light wall panels, differ in their design depending on the model presented. A coherent control element is the control element, which corresponds to a different function. In the centre of the wall panel, there is a button for turning on/off the connected LED illumination, brightness and colour temperature for the CCT controllers, using the touch control slider. The colour scheme of the RGB, RGB+W or RGB+CCT multicolour driver is the same, the change is achieved through the discs on which the individual colours or touch sliders are located. The rest of the buttons already refer to the specific features available for the model, as shown in the above image.

Glass touch panel - touch control

The glass touch panel in the Mi-Light series not only provides an aesthetically pleasing appearance due to the absence of protruding buttons but also a full touch screen with touchpads for different functions depending on the model of the device. In addition to the glass wall panel, it has good protection against all kinds of minor scratches, so you get high durability for a long period of time.

Entire room within reach of the hand - zone control

Some of the Mi-Light transmitters provide access to multiple zones fully controlled by one device. The use of such a method makes it easy to use the LED installation in a given room, allowing for future expansion of lighting at any time, when we do not need several zones in our installation, just another pairing of the connected receiver together with LED lighting with our device to the next zone. An interesting feature is an ability to program an unlimited number of receivers to a particular zone, in this case only the output parameters of the receiver.

Full control - cooperation with receiving devices

Each of the Mi-light LED driver series is characterized by the ability to assign multiple devices to it. Built-in invisible underneath the electronics, it works on the principle of the receiver, thus connecting with our LED driver. One zone in the remote control or wall panel is also not an obstacle because we can assign many devices such as LED lamps, downlight luminaires and receivers working with the model. Many devices do not interfere with each other and make this connection easy to use and easy to control. Above in the compatible MiBoxer products tab, you will find a full table showing all the devices that work with your model.

Mi-Light 4-Zone CCT adjust smart panel B2 specification

Mi-Light 4-Zone CCT adjust smart panel B2 package includes

1 x Mi-Light 4-zone wall dimmer B2

1 x Plastic wall mount

1 x User Manual (English)