This multifunctional device is an innovative 4-zone LED radio remote control from the Mi-Light series, which allows radio control up to 4 zones. You can individually control each zone or control them all simultaneously. The handheld remote is characterised by full control of RGB colours as well as the active change of brightness and colour temperature of the white light (CCT). The transmitter has touch buttons that are very sensitive to touch and make the light control pure fun! The FUT092 is compatible with many receivers from the Mi-Light series (please check the compatible MiBoxer products tab).
Receiver (s) must be purchased separately. For compatible receivers - (see the compatible MiBoxer products tab).
Application for installation:
RGB+CCT - multicolour with variable colour temperature
Key features of the FUT092 handheld remote
Dimming and brightening of the connected LED lighting
An active colour change from the RGB colour palette
Possibility to turn white (using RGB+W strip)
Colour temperature CCT (warm and cold colour)
Control of each zone separately
Enables/disables all zones simultaneously
Active dynamic programs to use (change mode/speed)
Features of the Mi-Light FUT092 remote
Supports up to 4 zones
Application for RGB+CCT lighting
Radio communication with receivers (2.4GHz)
Works with Wi-Fi controller (optional)
Built-in dynamic programs that enrich RGB installations
Ability to extend the installation at any time
Ability to ignite blends of monochrome diodes in RGB colour mode
Touch buttons
24 months warranty
The basic way of communicating receivers with the FUT092 transmitter is by radio waves, it is through which data transmission takes place, giving us the freedom to use the wireless LED driver. Optional Wi-Fi control, which lets you control your lighting with your mobile device, is available only through the appropriate Wi-Fi module.
Table 2. Dynamic programs for FUT092
| Number | Function | Change speed | Change brightness |
|---|
| 1 | Pulsating dimming/brightening of red | Possible | Possible |
| 2 | Smooth change of colours available from the colour palette (RGB) | Possible | Possible |
| 3 | Liquid temperature change on white diodes (CW/WW) | Possible | Possible |
| 4 | Smooth change of brightness level of RGB+CW/WW LEDs (each is lit separately) | Possible | Possible |
| 5 | Dynamic colour change (red> green> blue> yellow) | Possible | Possible |
| 6 | An energetic and random variation of the colour palette | Possible | Possible |
| 7 | Smooth dimming of red, which ends with three flashes | Possible | Possible |
| 8 | Fluid dimming green, which ends with three flashes | Possible | Possible |
| 9 | Smooth blue dimming, which ends with three flashes | Possible | Possible |
Endless possibilities - great functionality
The rapidly evolving technology in the LED industry allows for incredible control and innovative solutions available at any time within the reach of our hands. Devices labelled RGBWW or RGB+CCT allow you to obtain each colour from the RGB palette with colour temperature CCT monochrome LEDs, both warm white and cold white. This solution allows the device to be adapted to the conditions of the room, making the product more practical. This feature is incredibly enjoyable, thanks to the well-designed LED drivers that allow you to wirelessly control your LED installation.
Great comfort - 16 million colours to drive
The construction of the Mi-Light series allows full access to the colour palette of up to 16 million colours. Obtaining a given shade of colour depends on the precision of the control, which is usually done with tactile transmitters. The colours of the device are colourful and pleasant, and the effective colour rendering ratio allows you to fully enjoy the colourful mood of the room together with the Mi-Light series products.
Remote construction - control has not been so easy
Depending on the model of the transmitting device, which mainly occurs as a radio link to the receiver, various control functions can be obtained. The centre of the touchscreen is the main function of the control, it is through it that we can change the colour or the brightness of the LED. At the very top of the remote control, there are buttons to enable/disable all available zones in our LED installation. Buttons for turning on/off the zone are located at the bottom of the device stacked side by side.
Entire room within reach of the hand - zone control
Some of the Mi-Light transmitters provide access to multiple zones fully controlled by one device. The use of such a method makes it easy to use the LED installation in a given room, allowing for future expansion of lighting at any time when we do not need several zones in our installation, just another pairing of the connected receiver together with LED lighting with our device to the next zone. An interesting feature is the ability to program an unlimited number of receivers to a particular zone, in this case only the output parameters of the receiver.
Mi-Light RGB+CCT remote controller FUT092 specification
| Application for | RGB+CCT installation |
| Number of zones/channels supported | 4 |
| Controlling via | Radio |
| Controlling method | Buttons + colour wheel |
| Powered by | 2 x 1.5V AAA battery (not included) |
| Signal modulation | GFSK |
| Type of transmission | One-way |
| Power consumption | 6dBm |
| Standby power consumption | 20uA |
| Compatible with | Mi-Light RGB+CCT series (see the compatible MiBoxer products tab) |
| Method of communication | 2.4GHz radio |
| Controlling range | up to 30 meters in an open area |
| Colour | White |
| Degree of protection | IP20 |
| Model number | FUT092 |
| Dimensions[mm] | L138 x W56 x H38 |
| Certification | RoHS, CE, UKCA |
| Warranty | 2 years |
Mi-Light 4-zone RGB+CCT remote controller package includes
1 x Remote controller FUT092 (batteries not included)
1 x User Manual (English)
Leave a review