Mi-Light RGB+CCT LED strip controller FUT045

Mi-Light RGB+CCT LED strip controller FUT045

Radio LED receiver 15A - 12-24V DC - Mi-Light - RGB+CCT is a small device used to control multi-coloured LED lighting with variable colour temperature. The device has been designed in a way that allows changing the colour and brightness intensity together with obtaining the colour temperature for white, by using a suitable controller. The communication of such a device is carried out via a radio route, it is through this receiver that it communicates with the transmitting device. The receiver cooperates with devices of the Mi-light series.

The remote control or wall panel must be purchased separately. For compatible products please see the compatible MiBoxer products tab.

Application for installation:

RGB+CCT multicolour with variable colour temperature

Features of the FUT045 - Mi-Light receiver

Application for RGB+CCT tapes (multi-coloured with variable colour temperature)

Wireless communication with the control device

The possibility of obtaining any colour

Obtaining control of colour temperature and brightness intensity

Cooperation with Wi-Fi network (additional option)

The range of I / O voltage in the range 12-24V DC

Application of several receivers to one zone

Maximum current carrying capacity 15A

Small size

The form of communication that connects the transmitter with the receiver is via a radio route. The signal based on 2.4GHz frequency allows for wireless installation at a level of 30 meters in open terrain. When using more devices (receivers), we can create LED installations based on an unlimited range, thanks to the technology of signal retransmission. The condition of such work is to place another receiving device within 30 meters. The products cooperating with the FUT045 receiver can be found in the compatible MiBoxer products tab.

Receiver power supply - connectors for easy assembly

Receiving devices are supplied with a DC voltage of 12VDC or 24VDC, which must be supplied to the input of the device. In order to facilitate assembly, the construction of receivers consists of screw terminals, both at the entrance and at the exit, which makes it easier to bring the wires to the device. In addition, if you have a power supply that has a DC plug at the output, you can directly plug it into the DC jack located next to the input terminals of the receiver. The cable connection is stable and quick to assemble.

Full control - cooperation with transmitting devices

Wireless radio route through which devices communicate provides a full range of possibilities related to control. Depending on the product, the control can be carried out with the help of many available radio remote controls operating on the 2.4 GHz frequency. This basic form of communication provides stable control of LED lighting within 30 meters in an open area. In addition, most products can be expanded with an alternative form of control, through the use of a Wi-Fi module, which allows you to connect our mobile application with a compatible device series Mi-Light. The transmitting devices cooperating with a given device can be seen above in the compatible MiBoxer products tab.

The higher load capacity of outputs - more possibilities

The radio receiver was created in a way allowing to increase the maximum load capacity of the outputs. This means that in relation to previous Mi-Light series receivers, connecting more LED strips. In total, we can charge such device with a current of 15A.

Automatic synchronization - signal retransmission

When there are more receivers in the installation controlled by one transmitting device, the installation synchronizes together during operation, without causing any delays during operation of the devices. Increasing the radio signal in the installation is possible by using several receivers. These devices are characterized by the transmission of the received signal to the next device, thus increasing the control range of the LED installation (Distance between the receivers cannot be greater than 30m).

Compatible remotes

Mi-Light RGB+CCT LED strip controller FUT045 specification

Mi-Light RGB+CCT LED strip controller FUT045 package includes

1 x RGB+CCT receiver in a retail box

1 x Manuals

1 x Double-sided adhesive pad