Mi-Light RGB+CCT full touch remote controller FUT088

Mi-Light RGB+CCT full touch remote controller FUT088

Single-zone LED radio remote control series Mi-Light, is a device that allows control of one of the available zones using a radio receiver. It is characterized by the full control option, both obtaining any colour from the RGB colour palette, as well as the active change of brightness intensity with the CCT colour temperature. It is powered by two 1.5V AAA batteries. The transmitter cooperates with devices from the Mi-Light series (receivers, light bulbs, downlights, etc.)

Application for installation:

RGB - multi-coloured

RGB+W - multi-coloured with additional white colour

RGB+CCT - multi-coloured with a variable colour temperature

Characteristic functions of the Mi-Light radio remote control - FUT088

Switching on and switching off connected LED lighting
Dimming and brightening of connected LED lighting
Obtaining the same monochrome colour
The colour can be controlled for the zone
The ability to control the colour temperature for the zone
Quick activation of the red/green/blue colour through the touch button
Available dynamic programs that change the work characteristics
Changing the speed of dynamic programs being played
Temporarily switching off the lighting after 60 seconds or 10 minutes

Features of the Mi-Light radio remote control - FUT088

One zone to use

Power supply using two 1.5V AAA batteries

Radio range up to 30 meters

Extend the radio signal by retransmitting the signal

Cooperation with mobile applications (additional option)

Easily accessible static colours

Wall mount

24 months warranty

The form of communication that connects the transmitter with the receiver is via a radio route. The signal based on the frequency of 2400-2483.5MHz allows for wireless operation of the installation at the level of 30 meters in open terrain. Using more devices, we can create LED installations based on unlimited coverage, thanks to the technology of signal retransmission. The condition of such work is to place another receiving device within 30 meters. The products cooperating with the wall-mounted panel FUT088 can be found in the compatible MiBoxer products tab.

Table 2. Dynamic programs for the Mi-Light radio remote controller - FUT088

The construction of a radio remote control - a small touch, great possibilities

Wireless communication - radio route

 

The wireless radio route that these radio remotes have, provides comfortable control of LED lighting within 30 meters in an area not exposed to interference. Increasing the radio signal in the installation is possible by using several receiving devices assigned to one zone. These devices are characterized by the transmission of the received signal to the next device, thus increasing the control range of the LED installation (The distance between the receivers cannot be greater than 30m).

Delayed delay function - two operating modes

 

Another useful functionality that can be proud of these remotes from the Mi-Light series is undoubtedly the time mode responsible for switching off the LED lighting. This mode consists in turning off the lighting completely after one or ten minutes of time, thus ensuring that activities are carried out, such as comfortably leaving the room, when it is completely dark or dark outside. The advantage of such a solution is quick access to the mode, using the appropriate button located on the radio remote control.

Mi-Light RGB+CCT full touch remote controller FUT088 specification