Multifuncional FUT096 remote control
This Mi-Light four-zone LED radio remote controller is one of the most favourite handheld remotes by our customers, which allows individual control of each zone using the radio receivers such as FUT037, FUT038, FUT039 and many more (to see the full list of compatible products with FUT096 manual please see the compatible MiBoxer products tab. The multifunctional Mi-Light remote controls the RGB and RGB+W colour palette, as well as adjust the brightness of the connected LEDs using the classic buttons. This transmitter works with Mi-Light multifunction devices (receivers, bulbs, downlights, etc.).
Receiver (s) need to be purchased separately. For compatible receivers please see the compatible MiBoxer products tab.
Application for installation:
RGB - multicolour RGB+W - multicolour with extra white
Characteristic features of the Mi-Light remote control FUT096
Dimming and brightening of the connected LED lighting
Active colour change from RGB colour palette
Possibility to turn white (using RGB+W tape)
Control of each zone separately
Enables/disables all zones simultaneously
Active dynamic programs to use (change mode/speed)
Features of the Mi-Light remote control FUT096
Four zones to use Powered by 2 x 1.5V AAA batteries (not included)
Application for RGB/RGBW tapes
Radio communication with receivers (2.4GHz)
Built-in dynamic programs to diversify multi-colour installations
Works with Wi-Fi controller (optional)
Ability to extend the installation at any time
Touch buttons
24 months warranty
Table 1. Dynamic programs for the Mi-Light 2.4GHz 4 zone touch RF RGBW remote control FUT096
| Number | Function | Change speed | Change brightness |
|---|
| 1 | Smooth change of red, green, blue and white colours | Possible | Possible |
| 2 | Jumps between red, green, blue, yellow, purple, blue and white | Possible | Possible |
| 3 | Quick jump between different colours | Possible | Possible |
| 4 | Smooth brightening and dimming of red and triple flash | Possible | Possible |
| 5 | Smooth brightening and dimming of green and triple flash | Possible | Possible |
| 6 | Smooth brightening and dimming of blue and triple flash | Possible | Possible |
| 7 | Combined programs no. 3/4/5/6 | Possible | Possible |
| 8 | Slow, smooth flow between different colours | Possible | Possible |
| 9 | Dimming and brightening of white (W) | Possible | Possible |
Great comfort – 16 million colours to drive
The construction of the Mi-Light controller FUT096 series allows full access to the colour palette of up to 16 million colours. Obtaining a given shade of colour depends on the precision of the control, which is usually done with tactile transmitters. The colours of the device are colourful and pleasant, and the effective colour rendering ratio allows you to fully enjoy the colourful mood of the room together with the Mi-Light series products.
Remote construction - control has not been so easy
Depending on the model of the transmitting device, which mainly occurs as a radio link to the receiver, various control functions can be obtained. The centre of the touchscreen, the main function of the control, it is through it that we can change the colour or the brightness of the LED. At the very top of the remote control, there are buttons to enable/disable all available zones in our LED installation. Buttons for turning on/off the zone are located at the bottom of the device stacked side by side.
Entire room within reach of the hand - zone control
Some of the FUT096 transmitters provide access to multiple zones fully controlled by one device. The use of such a method makes it easy to use the LED installation in a given room, allowing for future expansion of lighting at any time, when we do not need several zones in our installation, just another pairing of the connected receiver together with LED lighting with our device to the next zone. An interesting feature is an ability to program an unlimited number of receivers to a particular zone, in this case only the output parameters of the receiver.
Full control - cooperation with receiving devices
Each of the Mi-light LED driver series is characterized by the ability to assign not only one device to it. Built-in invisible underneath the electronics, it works on the principle of the receiver and thus connects to our LED driver. One zone in the remote control is also not an obstacle because we can assign to it many devices such as LED bulbs, downlights and receivers working with the model.
RGBW remote control FUT096 specification
| Application for | RGB+W installation |
| Number of zones/channels supported | 4 |
| Controlling via | Radio |
| Controlling method | Buttons + colour wheel |
| Powered by | 2 x 1.5V AAA battery (not included) |
| Signal modulation | GFSK |
| Type of transmission | One-way |
| Power consumption | 6dBm |
| Standby power consumption | 20uA |
| Compatible with | Mi-Light RGBW series (see the compatible MiBoxer products tab) |
| Method of communication | 2.4GHz radio |
| Controlling range | up to 30 meters in an open area |
| Colour | White |
| Degree of protection | IP20 |
| Model number | FUT096 |
| Dimensions[mm] | L120 x W52.5 x H21 |
| Certification | RoHS, CE, UKCA |
| Warranty | 2 years |
Mi-Light 2.4GHz 4-zone touch RF RGBW remote control FUT096 package includes
1 x Remote controller FUT096 (batteries not included)
1 x User Manual (English)
In our offer, you will also find remote control wall holder FUT099.
