MiBoxer Stair Light Series

Design your perfect staircase lighting

The MiBoxer stair lighting system combines elegant sequenced fades with practical night-time safety. All parts run on 24 V DC, with two-wire PLC carrying power and data along one tidy trunk. Add optional 2.4 GHz remotes for quick manual control and use the mobile app for fine-tuning.

Build your kit

• BS64 2-Wire PLC Stair Light Master – the brain. Controls 2–64 steps, offers Bluetooth (app) + 2.4 GHz RF, step time and delay settings, night-light levels and light sensor modes.¹
• BS-L2 Stair Light Sub-Device – slim, 1 m dual-white step light (approx. 7 W, ~350 lm, 2700–6500 K, 120°) for a clean, plug-and-play finish.²
• BS-L2C Stair Light Control Board – tiny CCT adapter (24 V, 1 A) that lets you use your own dual-white LED strip per step.³
• BS-TL Stair Light T-Cable – pre-terminated branches to connect each step/sensor neatly to the two-wire trunk.⁴

Why choose the MiBoxer system?

• Effortless wiring: two-wire PLC for power + data on the same pair.¹
• Scales from 2 to 64 steps: ideal for homes, showrooms and boutique hospitality.¹
• Tunable white (CCT): set warm evening glow or bright daytime white for safer footing.^1,2
• Flexible control: Bluetooth app + 2.4 GHz RF remotes; push-button and PIR inputs supported.^1,5

Choosing between BS-L2 vs BS-L2C + strip

Want the fastest install? Pick the integrated BS-L2 step lights (consistent optics and finish).
Already have a CCT strip profile? Use BS-L2C per step to drive your own dual-white strip.

Typical wiring

1. Run a 24 V DC feed to the BS64 master.
2. Lay a two-wire PLC trunk up/down the stairs and branch with BS-TL T-cables.
3. At each step, connect either a BS-L2 or one BS-L2C + CCT strip.
4. Optionally add two PIR sensors (up/down) and pair a 2.4 GHz remote.

Good to know

• All components are 24 V DC. Check total power and cable gauge for your run length.
• App control via Bluetooth; 2.4 GHz accessories for one-touch scenes/speed.
• Use low-glare optics and warm CCT in bedrooms; keep higher CCT for hallways/retail.

FAQs

The BS64 master supports 2–64 steps, adjustable in the app.¹

Yes. Add one BS-L2C board per step to drive a dual-white strip from the BS64 system.³

Bluetooth app gives full setup (step timing, delays, CCT, night-light). 2.4 GHz RF remotes offer quick brightness/CCT tweaks and mode switching.^1,5

Use a regulated 24 V DC PSU sized for your total load (sum of all steps). The BS64 page lists an overall power envelope; design with headroom.

¹ BS64 master capabilities. ² BS-L2 spec. ³ BS-L2C spec. ⁴ Category parts listing. ⁵ Manual notes: remote/push/PIR support.