Mi-Light RGBW smart LED control system FUT044A

Mi-Light RGBW smart LED control system FUT044A

The RGB+W 12-24V 15A driver set is a ready product for wireless control of multicolour LED lighting along with white colour (e.g. RGB+W LED strip). The radio remote control allows you to obtain any RGB colour and white colour for the LED lighting used. Communication with the receiving device is carried out via a radio, which provides 30m wireless control in an area not exposed to interference. The set works with devices of the Mi-Light series.

Switching the zone on and off

Dimming and brightening the lighting assigned to the zone

The ability to control the colour

Obtaining the same monochrome colour (one colour)

Static colours to attach

Two-time modes of switching off LED lighting

Available dynamic programs that change the work characteristics

Changing the speed of dynamic programs being played

One zone for lighting

Battery-powered (2x AAA 1.5V)

Radio range up to 30 meters

Maximum load on the 15A receiver

Touch buttons

Wall holder for the remote control

Access to the installation of the mobile application (optional)

24 months warranty

Basic communication with receivers is carried out by means of radio. Obtaining an optional control by connecting to a Wi-Fi network, which enables the control of lighting with the help of mobile devices (e.g. smartphone or tablet), is available only after using the appropriate Wi-Fi module. When using more devices (receivers), we can create LED installations based on unlimited range, thanks to the technology of signal retransmission. The condition of such work is to place another receiving device within 30 meters.

Table 1. Dynamic programs for the Mi-Light radio remote controller - FUT088

Panel construction - control has not been so easy

Wireless communication - radio route

The wireless radio route that these radio remotes have, provides comfortable control of LED lighting within 30 meters in an area not exposed to interference. Increasing the radio signal in the installation is possible by using several receiving devices assigned to one zone. These devices are characterised by the transmission of the received signal to the next device, thus increasing the control range of the LED installation (Distance between the receivers cannot be greater than 30m).

Delayed delay function - two operating modes

Another useful functionality that can be proud of these remotes from the Mi-Light series is undoubtedly the time mode responsible for switching off the LED lighting. This mode consists in turning off the lighting completely after one or ten minutes of time, thus ensuring that activities are carried out, such as comfortable leaving the room, when it is completely dark or dark outside. The advantage of such a solution is quick access to the mode, using the appropriate button located on the radio remote control.

Higher load capacity of outputs - more possibilities

The radio receiver was created in a way allowing to increase the maximum load capacity of the outputs. This means that in relation to previous Mi-Light series receivers, connecting more LED strips. In total, we can charge such a device with a current of 15A.

Mi-Light RGBW smart LED control system FUT044A specification

Mi-Light RGBW smart LED control system FUT044A package includes

1 x RGBW receiver in a retail packaging

1 x Remote controller

1 x Wall holder for a remote controller

1 x Manuals

2 x Screws

2 x Wall plugs

1 x Double-sided adhesive pad