Mi-Light 4 zone RGB+CCT smart panel remote controller B4
Wall-mounted RGB+CCT controller - Mi-Light, is a wireless wall panel for brightness management with the ability to control a given RGB colour and CCT colour temperature for multi-colour devices with varying colour temperatures (eg. RGB+CCT receiver/bulb or devices included in the compatible MiBoxer products tab. The controller allows individual access for each zone, which a glass wall panel can control.
Application for installation: RGB+CCT - multicolour with variable colour temperature
Characteristic features of the Mi-Light wall panel - B4
Switching on or off the connected LED illumination
Enables and disables all zones simultaneously
Dimming and brightening of the connected LED lighting
Dimming and brightening of all zones simultaneously
Achieve monochromatic colour
Colour capability for individual/all zones
Colour temperature control for individual/all zones
Available dynamic programs to change the characteristics of the work
Change the speed of your dynamic programs
Features of the wall panel Mi-Light - B4
Four zones to use
Powered by two AAA batteries
Radio range up to 30 meters
A glass panel on the wall
Possibility of extension of the installation
Sound signalling
Gently illuminates the button for lighting
Construction suitable for surface mounting
24 months warranty
The wireless connectivity of the wall panel enables wireless control of up to 30 meters in open areas. Communication based on 2.4GHz frequency provides stable and synchronized operation of the LED lighting used.
Wall panel design - a small touch, big possibilities
Mi-Light wall panels differ in their design depending on the model presented. A coherent control element is the control element, which corresponds to a different function. In the centre of the wall panel, there is a button for turning on / off the connected LED illumination, brightness and colour temperature for the CCT controllers, using the touch control slider. The colour scheme of the RGB, RGB+W or RGB+CCT multicolour driver is the same, the change is achieved through the discs on which the individual colours or touch sliders are located. The rest of the buttons already refer to the specific features available for the model, as shown in the attached image.
Glass touch panel - touch control
The glass touch panel in the Mi-Light series not only provides an aesthetically pleasing appearance due to the absence of protruding buttons but also a full touch screen with touchpads for different functions depending on the model of the device. In addition to the glass wall panel, I have good protection for all kinds of minor scratches, so you get high durability for a long period of time.
Entire room is within reach of the hand - zone control
Some of the Mi-Light transmitters provide access to multiple zones fully controlled by one device. The use of such a method makes it easy to use the LED installation in a given room, allowing for future expansion of lighting at any time, when we do not need several zones in our installation, just another pairing of the connected receiver together with LED lighting with our device to the next zone. An interesting feature is the ability to program an unlimited number of receivers to a particular zone, in this case only the output parameters of the receiver.
Full control - cooperation with receiving devices
Each of the Mi-light LED driver series is characterised by the ability to assign multiple devices to it. Built-in invisible underneath the electronics, it works on the principle of the receiver and thus connects to our LED driver. One zone in the remote control or wall panel is also not an obstacle because we can assign many devices such as LED lamps, downlight luminaires and receivers working with the model. Many devices do not interfere with each other and make this connection easy to use and easy to control. Above in the compatible MiBoxer products tab, you will find a full table showing all the devices that work with your model.
Table 1. Table of dynamic programs - Mi-Light 4 zone RGB+CCT smart panel remote controller B4
| Number | Function | Speed change | Brightness change | Saturation change |
|---|
| 1 | Flashing orange colour | Yes | Yes | No |
| 2 | Smooth transition between all colours | Yes | Yes | Yes (saturation) |
| 3 | Smooth transition between warm and cold colours | Yes | Yes | No |
| 4 | Pulsating transition between three colours and warm white and cold white | Yes | Yes | No |
| 5 | Jump between six colours and white warm and cold | Yes | Yes | No |
| 6 | Jump between random colour sequences | Yes | Yes | No |
| 7 | Red flashing with three flashes | Yes | Yes | No |
| 8 | Blue blinking ended with three flashes | Yes | Yes | No |
| 9 | Green flashes with three flashes | Yes | Yes | No |
Mi-Light 4-zone RGB+CCT smart panel remote controller B4 specification
| Application | For multi-colour installations with variable colour temperature RGB+CCT |
| Maximum output current | Dependent on the receiver used |
| Powered by | 2 x 1.5V AAA batteries (not included) |
| The number of zones/channels supported | 1 to 4 |
| Modulation method | GFSK |
| Controlling method | Radio |
| Controlling range | up to 30 meters in an open area |
| Model number | B4 |
| Control frequency | 2400-2483.5MHz |
| Power consumption in operating mode | 6dBm |
| Power consumption in standby mode | 20uA |
| Working temperature | -20 – 60? |
| Type of installation | Surface |
| Colour | White |
| Product compatibility | See the compatible MiBoxer products tab |
| Ingress Protection | IP20 |
| Dimensions[mm] | L86 x W86 x H20 |
| Certification | RoHS, CE, UKCA |
| Warranty | 2 years |
Mi-Light 4 zone RGB+CCT smart panel remote controller B4 package includes
1 x Mi-Light 4-zone wall panel B4 in a retail box
1 x Plastic wall mount
1 x User Manual (English)
Leave a review