Mi-Light RGB smart LED control system FUT043A
The RGB 12-24V 15A driver set is a ready product for wireless control of multi-coloured LED lighting (eg RGB LED strip). The radio remote control allows you to obtain any RGB colour for the LED lighting used. Communication with the receiving device is carried out via a radio route, which provides 30 m wireless control in an area not exposed to interference. The set works with devices of the Mi-Light series.
The driver offered is a ready-made set: a radio remote control with a receiver
Characteristic functions for the set
Switching the zone on and off
Dimming and brightening the lighting assigned to the zone
The ability to control the colour
Static colours to attach
Two-time modes of switching off LED lighting
Available dynamic programs that change the work characteristics
Changing the speed of dynamic programs being played
Characteristic features for the set
One zone for lighting
Battery powered (2x AAA 1.5V)
Radio range up to 30 meters
Maximum load on the 15A receiver
Touch buttons
Wall holder for the remote control
Access to the installation from the mobile application (optional)
24 months warranty
Basic communication with receivers is carried out via radio. Obtaining an optional control by connecting to a Wi-Fi network, which enables the control of lighting with the help of mobile devices (eg smartphone or tablet), is available only after using the appropriate Wi-Fi module. When using more devices (receivers), we can create LED installations based on an unlimited range, thanks to the technology of signal retransmission. The condition of such work is to place another receiving device within 30 meters.
Wi-Fi control is possible
In order to gain access to the control via Wi-Fi, you must purchase the appropriate module, which you will find in the "Related Products" tab
Table 1. Dynamic programs for the Mi-Light radio remote controller - FUT088
| Number | Function | Change of speed | Changing the brightness |
|---|
| 1 | Smooth transition between all colours | Possible | Possible |
| 2 | Smooth pulsation of white colour - NO | Possible | Possible |
| 3 | Smooth transition between RGB colours | Possible | Possible |
| 4 | A jumping change of seven colours | Possible | Possible |
| 5 | A jumping change of random colours | Possible | Possible |
| 6 | Smooth pulsation of red colour ended with a triple flash | Possible | Possible |
| 7 | Smooth pulsation of green colour finished with a triple flash | Possible | Possible |
| 8 | Smooth pulsation of blue colour finished with a triple flash | Possible | Possible |
| 9 | The smooth pulsation of the white colour ended with a triple flash | Possible | Possible |
Panel construction - control has not been so easy
Wireless communication - radio route
The wireless radio route that these radio remotes have, provides comfortable control of LED lighting within 30 meters in an area not exposed to interference. Increasing the radio signal in the installation is possible by using several receiving devices assigned to one zone. These devices are characterized by the transmission of the received signal to the next device, thus increasing the control range of the LED installation (Distance between the receivers cannot be greater than 30m).
Delayed delay function - two operating modes
Another useful functionality that can be proud of these remotes from the Mi-Light series is undoubtedly the time mode responsible for switching off the LED lighting. This mode consists in turning off the lighting completely after one or ten minutes of time, thus ensuring that activities are carried out, such as comfortable leaving the room, when it is completely dark or dark outside. The advantage of such a solution is quick access to the mode, using the appropriate button located on the radio remote control.
Higher load capacity of outputs - more possibilities
The radio receiver was created in a way allowing to increase in the maximum load capacity of the outputs. This means that in relation to previous Mi-Light series receivers, connecting more LED strips. In total, we can charge such a device with a current of 15A.
Mi-Light RGB smart LED control system FUT043A specification
| Application | For RGB installations |
| Number of supported zones/channels | 1 |
| The way of control | radio |
| The way of control | Touch buttons + dial to change colours |
| The range of radio communication | up to 30 meters in open terrain (an increase of range through signal retransmission) |
| Powering the remote control | 2 x 1,5V AAA battery |
| Signal modulation | GFSK |
| Transmission type | one-way |
| Frequency of transmission | 2400-2483.5 MHz |
| Power consumption in operating mode | 6dBm |
| Power consumption in standby mode | 20uA |
| Touch buttons | Yes |
| Wall bracket | Yes |
| Colour | White |
| Remote dimensions | 47mm x 134mm x 16,5mm |
| Warranty | 24 months |
| The input/output voltage of the receiver | 12VDC or 24V DC |
| The maximum output current of the receiver | 15A |
| Number of receiver outputs | 3 outputs (R/G/B) - common anode |
| Output signal | PWM |
| Additional controls | Wi-Fi module (see the compatible MiBoxer products tab) |
| Return to previous settings after turning off the power | No |
| Working temperature | -20-60°C |
| Input connector (power supply) | Screw clamps for wires and DC socket |
| Output (signal) connector | Screw clamps for wires |
| Dimensions of the receiver | 97mm * 37mm * 28mm |
| Certification | RoHS, CE, UKCA |
| Warranty | 24 months |
Mi-Light RGB smart LED control system FUT043A package contains
1 x remote controller
1 x receiver
1 x remote wall holder
1 x manuals
1 x double-sided adhesive pad
2 x screws with plugs
