● Unique skin-like design, delicate touch, as smooth as baby skin.
● Standard 86*86mm dimension design.
● Rated voltage of 250V~.
● Capable of withstanding a maximum current of 10A.
DESIGN LIGHT 2m single colour LED strip extension wire 8mm
DESIGN LIGHT 2m single colour LED strip extension wire 8mm
Our 8mm LED strip connection wires are an easy way to connect your LED strip to DC adapter. There is no need for soldering just open the cover and put the LED strip in “plug and play”. Forget about throwing away offcuts with our connector you can use every little bit of your LED strip. For the connection between strip to the power supply or strip to the controller. Wires are soft and can be bent easily to adapt to your needs.
Installation Instructions:
• Ensure your section of LED light strip has two contacts (+ and -) and the contacts are both clean
• Open the white clasp of the connector
• Insert the LED light strip into the clasp, under the prongs – making sure to match the + and – on the strip to the + and – on the clasp
• Close the clasp
• Gently pull on the LED light strip to confirm you’ve made a solid connection
• Your connection is made!
Please check other LED strip accessories as well as other products available at our shop. In case you have any questions just contact us.
DESIGN LIGHT 2m single colour LED strip extension wire 8mm specification
LED strip handling: | 8mm |
Material: | PVC |
Dimensions(mm): | L15 x H5 x W12 |
IP rating: | IP20 |
LED type: | 3528/2835 |
Warranty: | 2 years |
Working temperature: | 0-40°C |
Storage temperature: | -20 ~ 60°C |
Wire length: | 2000mm |
Do you have a 10mm wide LED strip? Check out the 10mm LED strip connector with 2m wires
Data sheet
Specific References
● Unique skin-like design, delicate touch, as smooth as baby skin.
● Standard 86*86mm dimension design.
● Rated voltage of 250V~.
● Capable of withstanding a maximum current of 10A.
Product Name: 2-Pin 12-Channel Junction Box
Model No.: DS2-12C
lnput Voltage: DC24V
Output Current: Max 7A
Working Temp: -10~40°C
Material: ABS
Cable Length: 1m
• 12-Channel Dupont connector
• Multi ports for using, signal transmitting quickly and smoothly
• Max current 7A, ABS plastic enclosure, portable wiring
Light colour: warm white, neutral white, cold white
Voltage: 24V DC
Colour temperature of the light: 3000K, 4000K, 6000K
Luminous flux: 660LM/m 2900LM/5m 760LM/m 3300LM/5m 805LM/m 3520LM/5m
Power (meter): 11W
LED type: COB
Amount of LEDs: 312 LEDs/m
Lighting angle: 120°
Cutting section: 38.5mm
The degree of protection: IP20
Sold per: pack (5m)
LRS-35-24 35W Single Output Switching Power Supply
LRS-50-24 50W Single Output Switching Power Supply
LRS-75-24 75W Single Output Switching Power Supply
LRS-100-24 100W Single Output Switching Power Supply
LRS-150F-24 150W Single Output Switching Power Supply
LRS-150-24 150W Single Output Switching Power Supply
LRS-200-24 200W Single Output Switching Power Supply
LRS-350-24 350W Single Output Switching Power Supply
Name: 2 Wires COB CCT Strip Light
Model No.: CSL2N2WH
Input Voltage: 24V⎓
Power: 8W/m, 31W/5m
Luminous Flux: WW:430LM/m, 1890LM/5m
CW: 530LM/1m, 2320LM/5m
LED Chip Specification: COB Chip
LED Chip QTY: 120 LED / m
Colour Temperature: 2700K~6500K
CRI: >90
Board Material Copper Thickness: 2.5 oz (Front 1 oz, Back 1.5 oz)
LED Strip Width: 5mm
Tailor Length: Min 20mm
IP Rate: Non-waterproof IP20
Beam Angle: 120°
Warranty: 2 Year
Packing: 5m per roll
Extendability: Max 10m
• Safe voltage 24V⎓
• High CRI
• Best ability for heat dissipation and low luminous decay
Product Name: 3 in 1 LED Strip Controller (Zigbee 3.0+ 2.4G)
Model No.: FUT037Z+
Working Voltage: DC12~24V
Output: 6A/Channel
Total Output: Max 12A
Work Temperature: -10~40℃
Wireless Technology: Zigbee 802.15.4
Zigbee Wireless Frequency: 2.400-2.480GHz
Zigbee Control Distance: 100m (open area)
2.4G RF Remote Control Distance: 30m
• Product follows Zigbee 3.0 standard protocol
• Zigbee Control distance: 100m (open area)
• Compatible with Mi-Light/MiBoxer 2.4GHz series remote
• 2.4G RF Remote Control Distance: 30m
• 16 Million colours to choose
• Brightness and colour temperature adjustable
• Switching 3 output modes via one button (RGB/RGBW/RGB+CCT)
Product Name: RGB LED Controller
Model No.: FUT037P+
Input Voltage: DC12~48V
Output Current: 10A/Channel
Total Output: Max 20A
Working Temperature: -10~40℃
RF: 2.4GHz
Control Distance:30m
• Compatible with Mi-Light/MiBoxer 2.4GHz series remote
• Control Distance: 30m
• 16 Million colours to choose
• Brightness and colour temperature adjustable
• Switching 3 output modes via one button (RGB/RGBW/RGB+CCT)
Product Name: 2 in 1 LED Strip Controller (WiFi+2.4G)
Model No.: FUT037W+
Working Voltage: DC12~24V
Output: 6A/Channel
Total Output: Max 12A
WiFi Standard: IEEE 802.11b/g/n 2.4GHz
Bluetooth Protocol: Bluetooth 4.2 (low power consumption)
RF: 2.4GHz
Remote Control Distance: 30m
Working Temperature: -10~40℃
• Support “Tuya Smart” app control
• Support music rhythm
• Support third-party voice control (Alexa, Google Assistant)
• 2.4G RF Remote controllable
• Colour temperature and brightness adjustable
• Switching 3 output modes via one button (RGB/RGBW/RGB+CCT)
Please sign in first.
Sign inCreate a free account to save loved items.
Sign inCreate a free account to use wishlists.
Sign inPlease sign in first.
Sign in
Leave a review