MiBoxer 2 in 1 LED strip controller (Zigbee 3.0+ 2.4G) FUT035Z+
The LED receiver 2in1 MONO/CCT - 12-24V DC 12A- Zigbee 3.0 - MiBoxer, is a small-sized device used to control monochromatic MONO and variable CCT colour temperature LED lighting. The device has been designed to allow you to change the colour temperature of the connected CCT LED strip or the brightness intensity for a single-colour MONO strip, using the Zigbee 3.0 communication protocol. Communication of such a device is carried out via radio and WiFi network using a Zigbee 3.0 gateway, it is through it that the receiver communicates with a mobile application or a transmitting device supported by the Zigbee 3.0 system. Access to the receiver can also be obtained using Amazon Alexa or Google Home voice systems. This receiver works with devices of the Mi-light/MiBoxer series.
The "Zigbee" series are mainly products based on the Zigbee 3.0 communication protocol, which is characterised by the low power consumption of the transmitted signal and a very large range of 100 meters in the open area. This series is characterised by very small dimensions because they are smaller than the credit cards in our wallets. Relative to the standard series of MiBoxer receivers, they have the same load capacity, which is a big advantage.
Application for installation:
MONO - monochrome
CCT - with variable colour temperature
Features of the FUT035Z+ Zigbee - Mi-Light receiver
Possibility of using the device for two MONO/CCT installations
Application for single-colour MONO and for variable CCT colour temperature LED tapes
Obtaining colour temperature control in the range of 2700-6500K
Changing the brightness intensity for the connected light source
Communication using the ZigBee 3.0 protocol
The need to use the ZigBee 3.0 MiBoxer gateway
Control using a mobile application
Increased current carrying capacity up to 12A
Input/output voltage range 12-24V DC
Built-in diode signalling the work of the receiver
Cooperation with Amazon Alexa and Google Home voice systems
Possibility of using several receivers for one zone
Very small sizes
The innovative solution of receivers in this series is cooperation with the modern voice system such as Amazon Alexa and Google Assistant. The intelligent system connects to our application, constituting an additional pillar of control for the voice assistant Alexa or Google Assistant, which, using voice commands, allows you to control, for example, the intensity of brightness or colour in given rooms. In addition, they allow you to integrate devices with external systems such as Philips Hue and Ikea Tradfri.
The connectivity of the Mi-Light/MiBoxer series receivers supported by Zigbee is characterised by wireless communication with remote control. The range of such a connection is 100 meters in the open area, provided that it is not exposed to various types of interference.
The series with a plus is characterised by even greater versatility in the operation of LED drivers from the MiBoxer series. They have now gained the possibility of using them for various LED lighting installations. Products with a "plus" are dedicated to monochrome installations (MONO/CCT) and multi-colour installations (RGB/RGB+W/RGB+CCT)
Receiving devices are powered with a DC voltage of 12VDC or 24VDC, which must be connected to the input of the device. In order to facilitate installation, the construction of the receivers consists of screw terminals, both at the input and output, which greatly facilitates the connection of wires to the device. In addition, if you have a power supply that has a DC plug at the output, you can directly plug it into the DC socket located next to the input terminals of the receiver. The connection of the wires is therefore stable and quick to assemble.
Devices supported by the Zigbee 3.0 network allow for additional possibilities for LED controllers because a dedicated application designed for MiBoxer products enables functions such as - setting your own scenes, biorhythm or five different operating modes such as - night mode, time mode, music mode, motion mode or do not disturb.
Compatible remotes
MiBoxer 2 in 1 LED strip controller (Zigbee 3.0+ 2.4G) FUT035Z+ specification
| Application |
For MONO (single-colour) or/and CCT (dual-white) installations |
| Output current |
6A per channel |
| Maximum output current |
12A |
| Input/Output Voltage |
12V DC or 24V DC |
| Number of outputs |
2 channels (WW/CW/V+) |
| Controlling method |
WiFi technology and additionally radio, (Zigbee gateway 802.15.4) |
| Controlling range |
Zigbee: up to 100 meters, 2.4G RF: 30m in an open area |
| Model number |
FUT035Z+ |
| Wireless frequency |
2.400-2.480GHz |
| Working temperature |
-10~40℃ |
| Compatible devices |
please see the compatible MiBoxer products tab |
| Return to previous settings after powering off |
Yes |
| Input connector (power supply) |
Screw terminals for bare wires and DC socket |
| Output connector (signal) |
Screw terminals for bare wires |
| Dimensions[mm] |
L74.5 x W36 x H17 |
| Certification |
RoHS, CE, UKCA |
| Warranty |
2 years |
MiBoxer 2 in 1 LED strip controller (Zigbee 3.0+ 2.4G) FUT035Z+ package includes
1 x smart 2 in 1 LED strip controller in a retail box
1 x user manual
Leave a review