Mi-Light smart panel controller colour temperature P2

Mi-Light smart panel controller colour temperature P2

CCT/MONO wall dimmer 12-24V DC 10A The Mi-Light is a wired wall panel for managing the brightness and colour temperature of CCT tapes. One zone allows individual access to the installation, which can be controlled by a touch-sensitive glass panel. This device is intended for flush mounting on standard fi60 boxes.

Application for installation: CCT - with variable colour temperature  

Characteristic features of the Mi-Light wall panel - P2

Switching on or off the connected LED illumination

Dimming and brightening of the connected LED lighting

Adjusting the colour temperature

Turn off the light with a 60-second delay

Record and read favourite sequences

Available dynamic programs to change the characteristics of the work

Features of the wall panel Mi-Light - P2

One zone to use

Suitable for 12-24V DC

No additional receivers (wired communication)

Glass implemented in the wall panel touch control (touch screen)

Sound signalling

Gently illuminates the button for lighting

Construction for fi60 box

24 months warranty

Mi-Light wall panel, characterised by wired communication. This connectivity ensures stable and synchronised operation of the connected LED lighting, without exposing it to radio interference.

Table 2. Dynamic programs for the Mi-Light smart panel controller colour temperature P2

Wall panel design - a small touch, big possibilities

Mi-Light wall panels, differ in their design depending on the model presented. There is a touch control box that corresponds to a different function. The centre of the wall panel contains the button for turning on / off the connected LED lighting, the brightness and the colour temperature for the CCT controllers, using the touch control slider. The colour scheme of the RGB, RGB + W or RGB + CCT multicolour driver is the same, the change is achieved through the discs on which the individual colours or touch sliders are located. The rest of the buttons already refer to the specific features available for the model, as shown in the attached image.

Glass touch panel - touch control  

The implemented glass touch panel in the Mi-Light range not only provides aesthetically pleasing appearance due to the absence of protruding buttons but also a full touch screen with touchpads for different functions depending on the model of the device. In addition to the glass wall panel, I have good protection for all kinds of minor scratches, so you get high durability for a long period of time.

Night mode - wall panel illumination

Mi-Light controllers in the form of wall panels have additional functions associated with the night illumination of the touchpad responsible for switching on the device, the included red LED, usually located in the centre of the wall panel, allows easy access to the dimmer when it is off. This gives you a quick glimpse of the device when the room is not well lit or full of darkness. The light emitted is gentle, therefore it is neutrally received by us and does not irritate our eyes.

Delayed shutdown function - minute out

Another useful feature of the Mi-Light wall panels is undoubtedly the time-saving mode for switching off the LED lighting. This mode consists of completely turning off the light after one minute of time, thus providing a function such as comfortable lowering the room when there is total dusk or darkness. The advantage of this solution is easy to access to the mode, with the corresponding button located on the glass wall panel.

Mi-Light smart panel controller colour temperature P2 specification

Mi-Light smart panel controller colour temperature P2 package includes

1 x Mi-Light wall panel controller P2 in a retail box

1 x Rubber wall seal

2 x Screws

1 x User Manual (English)