Type: 4-pin RGB PCB to bare wires connector
Designed for: 10mm RGB LED strips
Voltage: 5-24V
Type of connection: 4-pin
Colour: Multicolour
Total length: 170mm
Country of manufacture: China
IP rating: IP20
Warranty: 2 years
Our 10mm RGB 4-pin wire connector is an easy way to connect your LED strip to e.g. RF controller. There is no need for soldering just open the cover and put the LED strip in "plug and play". Forget about throwing away offcuts! With our connector, you can use every little bit of your LED strip. Wires are soft and can be bent easily to adapt your needs.
• Ensure your section of LED light strip has four contacts (R G B and +) and the contacts are clean
• Open the white clasp of the connector
• Insert the LED light strip into the clasp, under the prongs – making sure to match the + on the strip to the + on the clasp (black wire)
• Close the clasp
• Gently pull on the LED light strip to confirm you’ve made a solid connection
• Your connection is made!
Please check other LED strip accessories as well as other products available at our shop. In case you have any questions just contact us.
| LED strip handling: | RGB 10mm |
| Material: | Plastic |
| Dimensions(mm): | L160 x H5 x W14 |
| IP rating: | IP20 |
| Type: | RGB 5050 |
| Warranty: | 2 years |
| Working temperature: | 0-40°C |
| Storage temperature: | -20 ~ 60°C |
| Wire length: | 150mm |
If you need an RGBW version of this connector, you may find it here: 10mm RGBW 5 pin wire connector
Data sheet
Specific References
Please sign in first.
Sign inCreate a free account to save loved items.
Sign inCreate a free account to use wishlists.
Sign inPlease sign in first.
Sign in
Leave a review