Mi-Light 4-zone CCT adjust smart panel remote controller T2

Mi-Light 4-zone CCT adjust smart panel remote controller T2

LED wall-mounted radio dimmers - 230V AC - 4 ZONE - CCT - Mi-Light is a wireless wall panel that can manage brightness and CCT colour temperature for devices with variable colour temperature (eg CCT receiver/bulb or devices included in the compatible MiBoxer products tab). The dimmer allows individual access for each of the zones, which can be controlled via a glass wall panel. The device is designed for flush mounting in a fi60 box. The wall panel is supplied with 230VAC mains voltage.

Application for installation

CCT - with variable colour temperature

Characteristic features of the Mi-Light wall panel - T2

Switching ON and switching OFF connected LED lighting

Switching ON and OFF all zones simultaneously

Dimming and brightening of connected LED lighting

Dimming and brightening all zones simultaneously

Change of colour temperature for individual/all zones

Immediate reduction in brightness (night mode)

Turning off the lighting with a 60-second delay

Features of the Mi-Light wall panel - T2

Four zones to use

Direct supply from the 230VAC mains

Radio range up to 30 meters

Glass wall panel

The possibility of expanding the installation

Sound signalling

A gentle backlight of the diodes shows the work of the device

The construction is adapted for flush mounting - fi60 box

24 months warranty

The radio connectivity of the wall panel allows for wireless control at a level of 30 meters in the open area. Communication based on 2.4GHz frequency ensures stable and synchronized operation of the LED lighting used. The products cooperating with the T2 wall panel can be found in the compatible MiBoxer products tab.

Wall panel design - small touch, big possibilities

Mi-Light wall panels differ in their design depending on the model presented. A coherent control element is the control element, which corresponds to a different function. In the centre of the wall panel, there is a button for turning on / off the connected LED illumination, brightness and colour temperature for the CCT controllers, using the touch control slider. The colour scheme of the RGB, RGB+W or RGB+CCT multicolour driver is the same, the change is achieved through the discs on which the individual colours or touch sliders are located. The rest of the buttons already refer to the specific features available for the model, as shown in the attached image.

Glass touch panel - touch control

The glass touch panel in the Mi-Light series not only provides an aesthetically pleasing appearance due to the absence of protruding buttons but also a full touch screen with touchpads for different functions depending on the model of the device. In addition to the glass wall panel, I have good protection for all kinds of minor scratches, so you get high durability for a long period of time.

Entire room within reach of the hand - zone control

Some of the Mi-Light transmitters provide access to multiple zones fully controlled by one device. The use of such a method makes it easy to use the LED installation in a given room, allowing for future expansion of lighting at any time, when we do not need several zones in our installation, just another pairing of the connected receiver together with LED lighting with our device to the next zone. An interesting feature is an ability to program an unlimited number of receivers to a particular zone, in this case only the output parameters of the receiver.

Full control - cooperation with receiving devices

Each of the Mi-light LED driver series is characterized by the ability to assign multiple devices to it. Built-in invisible underneath the electronics, it works on the principle of the receiver, thus connecting with our LED driver. One zone in the remote control or wall panel is also not an obstacle because we can assign many devices such as LED lamps, downlight luminaires and receivers working with the model. Many devices do not interfere with each other and make this connection easy to use and easy to control. Above in the compatible MiBoxer products tab you will find a full table showing all the devices that work with your model

Mi-Light 4-zone CCT adjust smart panel remote controller T2 specification

Mi-Light 4-zone CCT adjust smart panel remote controller T2 package includes

1 x Mi-Light 4-zone wall panel controller T2 in a retail box

1 x Rubber wall seal

2 x Screws

1 x User Manual (English)