Mi-Light 2.4GHz 4-zone RGBW remote control with button FUT095

Mi-Light 2.4GHz 4-zone RGBW remote control with buttons FUT095

Mi-Light 4-zone LED radio remote control, which allows individual control of each zone using the radio receiver. The multifunctional remote controls the RGB and RGB + W colour palette, as well as the brightness of the connected LEDs using the classic buttons.

The receiver/bulb needs to be purchased separately. For compatible receivers please see the compatible MiBoxer products tab.

Application for installation: RGB - multicolour RGB+W - multicoloured with extra white

Characteristic features of the Mi-Light 2.4GHz 4-zone RGBW remote control with buttons FUT095 

Dimming and brightening of the connected LED lighting

Active colour change from RGB colour palette

Possibility to turn white (using RGB+W tape)

Control of each zone separately

Enables/disables all zones simultaneously

Active dynamic programs to use (change mode/speed)

The basic way of communicating receivers with the transmitter is by radio, it is through which data transmission takes place, giving us the freedom to use the wireless LED driver. Optional Wi-Fi control, which lets you control your lighting with your mobile device (such as a smartphone or tablet), is available only through the appropriate Wi-Fi module. The cooperating devices are listed in the compatible MiBoxer products tab.

Table 2. Dynamic programs for the Mi-Light 2.4GHz 4-zone RGBW remote control with buttons FUT095

Great comfort - 16 million colours to drive

The construction of the Mi-Light series allows full access to the colour palette of up to 16 million colours. Obtaining a given shade of colour depends on the precision of the control, which is usually done with tactile transmitters. The colours of the device are colourful and pleasant, and the effective colour rendering ratio allows you to fully enjoy the colourful mood of the room together with the Mi-Light series products.

Remote construction - remote control has not been so easy

Depending on the model of the transmitting device, which mainly occurs as a radio link to the receiver, various control functions can be obtained. The centre of the touchscreen, the main function of the control, it is through it that we can change the colour or the brightness of the LED. At the very top of the remote control, there are buttons to enable/disable all available zones in our LED installation. Buttons for turning on / off the zone are located at the bottom of the device stacked side by side. The construction of the multi-zone remote control is simple, the buttons for the zone on / off are located at the bottom of the device stacked side by side so that access to them is convenient.

Entire room within reach of the hand - zone control

Some of the Mi-Light transmitters provide access to multiple zones fully controlled by one device. The use of such a method makes it easy to use the LED installation in a given room, allowing for future expansion of lighting at any time, when we do not need several zones in our installation, just another pairing of the connected receiver together with LED lighting with our device to the next zone. An interesting feature is an ability to program an unlimited number of receivers to a particular zone, in this case only the output parameters of the receiver.

Full control - cooperation with receiving devices

Each of the Mi-light LED driver series is characterized by the ability to assign not only one device to it. Built-in invisible underneath the electronics, it works on the principle of the receiver, thus connecting with our LED driver. One zone in the remote control is also not an obstacle because we can assign to it many devices such as LED bulbs, downlight luminaires and receivers working with the model.

Mi-Light 2.4GHz 4-zone RGBW remote control with buttons FUT095 specification

Mi-Light 2.4GHz 4-zone RGBW remote control with buttons FUT095 package includes

1 x remote controller with buttons FUT095

1 x User Manual (English)