Rotating wheel remote controller FUT006 - functional and easy to use
Four-zone LED radio remote control from the Mi-Light series, enabling the control of each zone individually using a radio receiver. The multifunctional remote controller FUT006 allows you to change the intensity of brightness and colour temperature by means of two modes of operation. The transmitter cooperates with devices from the Mi-Light series (receivers, light bulbs, downlights, etc.).
The receiver (s) need to be purchased separately. For compatible receivers please see Table #1.
Application for installation:
MONO - single-coloured
CCT - with variable colour temperature
Characteristic functions of the Mi-Light remote control - FUT006
Dimming and brightening of connected LED lighting
Control each zone separately
All zones can be turned on / off at the same time
Two operating modes - mono and CCT (change in colour temperature)
Immediate brightness reduction (night mode)
Features of the 4-zone Mi-Light remote control - FUT006
Four zones to use
Battery powered (2x1,5V AAA)
Radio communication with receivers (2.4GHz)
Cooperation with a Wi-Fi controller (additional option)
The possibility of expanding the installation at any time
24 months warranty
The basic communication with the receiver takes place by means of a radio route. Obtaining an optional control by connecting to a Wi-Fi network, which allows control of lighting with the help of mobile devices (eg smartphone or tablet), is available only after using the appropriate Wi-Fi module. Available cooperating Mi-Light remote control fut006 can be found in the table below or in the category "related products".
Table 1. Cooperating devices with LED remote control - Mi-Light - FUT006
|Product code||Product name|
||Mi-Light 2.4GHz multi white wireless WiFi dimmer FUT036
||Mi-Light 4-zone colour temperature dual white LED strip controller FUT035
||Mi-Light 6W dual white LED downlight FUT060
||Mi-Light 12W dual white LED downlight FUT061
||Mi-Light WiFi iBox smart light iBox1
||Mi-Light WiFi controller iBox2
Full control - cooperation with receiving devices
Each of the transmitting devices of the Mi-light LED driver series is characterized by the ability to assign not only one device to it. Built-in invisible under the housing electronics works on the principle of a receiving device thus connecting to our LED driver. One zone in the remote control is also not an obstacle because we can assign to it many devices such as LED bulbs, downlights or receivers cooperating with the given model. Many devices do not interfere with each other and make this connection easy to use and easy to control. Below you will find a full table showing all the devices that work with the given model.
Construction of the remote control - the control was not so easy
Depending on the transmitting device model, which occurs mainly as a remote controller that connects via radio to the receiver, we can obtain various control functions. The tactile dial located in the centre has the main control function, it is through it that we can, among others, quickly change the intensity of light or the colour temperature in the room. At the very top of the remote controls, there are buttons responsible for switching on / off all available zones in our LED installation. Buttons responsible for switching on/off a given zone are located on the bottom of the device arranged next to each other. The construction of multi-zone pilots is constructed in a simple way, making access to the most important functions convenient.
The whole room at your fingertips - zone control
Some of the Mi-Light transmitting devices provide access to multiple zones, fully controlled by one device. The use of such a procedure greatly facilitates the use of a created LED installation in a given room, while allowing the future development of lighting at any time, when we do not need several zones in our installation, just another pairing of the connected receiver with LED lighting with our device receiver to the next zone. An interesting feature is the ability to program an unlimited number of receivers to a given zone, the condition, in this case, are only the output parameters of the receiver.
Mi-Light 2.4GHz 4-zone rotating wheel remote controller FUT006 specification