LED RGB controller with infrared remote control
Application: For installing RGB LED colour. Remote control with receiver included.
Input voltage: 12V DC from the power supply of LED strips
Maximum output power: 72W at 12V;
Maximum channel output current: 2A
remote control with receiver: Regulator + remote control set paired at the factory. Infrared connection requires direct optical contact of the remote control with the IR sensor.
Brightness adjustment method: PWM - pulse width modulation
Built-in lighting programs:
# set brightness levels: 25%, 50%, 100% in static mode.
# brightening/dimming in 10 levels.
# 24 dynamic transition presets can be selected.
# The ability to adjust the speed of dynamic transitions.
Dimmer connections with the installation: Black 5.5 / 2.1mm DC plug and socket for connection to the LED power supply. RGB 4 pin female output. The receiver is integrated with a 12 cm cable. Receiver dimensions 40 x 13 x 7 mm
Operating temperature range and humidity: -20 - 60 ° C willow. 30-85%
Remote control dimensions: 86mm x 50mm x 7mm 33g
Remote buttons: 24 buttons.
Remote control power supply: 2025 or 2532 link included in the set.
declarations: RoHs, CE
Warranty: 24 months
Remote control functions:
on and off,
smooth brightness adjustment,
choice of 16 pre-programmed colours - including white,
4 colour change programs (blinking, smooth transitions, etc.),
smooth adjustment of colour change rate in programs,
wireless remote control - infrared
cable length with infrared detector: approx. 10cm
Leave a review