DESIGN LIGHT LED PVC RGB clip for glass shelving
LED PVC RGB clip with a power of 0.75W. This type of lighting is used mainly to illuminate glass shelves in sites, cabinets, barrows, cabinets, tables, displays, etc. The clip with minimal power consumption (one draws only 0.75W) gives fantastic illumination capabilities with built-in LEDs.
The recommended window thickness is 5-8 mm. The light emission angle is 60 degrees. Another advantage of the clip is the ability to control and change the lighting program using the RGB driver with remote control (not included). There are 20 programs available: 16 static and 4 dynamic modes.
The clip requires a 12V DC power supply and an RGB controller with a remote control to change the lighting program. All accessories are available in our store.
DESIGN LIGHT LED PVC RGB clip for glass shelving specification
| The colour of the binding | transparent |
| Voltage | 12V DC |
| Power consumption | 0.75 W |
| Colour of light | RGB |
| Degree of protection | IP20 |
| Dimensions (mm) | length 63 mm / width 22 mm / height 11 mm |
| Energy class | A ++ |
| Energy consumption kWh / 1000h | 0.75 kWh / 1000h |
| Luminous stream | 12 lm |
| Nominal shelf life | 30.000h |
| Number of on/off cycles | ≥15000 |
| Lighting time up to 60% of the full luminous flux | ≤1s |
| Cooperation with dimmers | YES |
| Place of application of the product | Internal use in a dry room. |
| The length of the wire | 2m cable ended with a mini RGB plug |
| Material | PVC |
| Light source included | YES |
DESIGN LIGHT LED PVC RGB clip for glass shelving package includes
1 x RGB clip for glass pane with 2m cable ended with a mini RGB plug
