10mm CCT 3 pin wire connector
Our 10mm CCT 3 pin wire connector is an easy way to connect your LED strip to e.g. RF controller. There is no need for soldering just open the cover and put the LED strip in "plug and play". Forget about throwing away offcuts! With our connector, you can use every little bit of your LED strip. Wires are soft and can be bent easily to adapt to your needs.
Installation Instructions:
• Ensure your section of LED light strip has three contacts (WW, CW and +) and the contacts are clean
• Open the white clasp of the connector
• Insert the LED light strip into the clasp, under the prongs – making sure to match the + on the strip to the + on the clasp (black wire)
• Close the clasp
• Gently pull on the LED light strip to confirm you’ve made a solid connection
• Your connection is made!
Please have a look at other LED strip connectors in our shop. In case you have any questions please do not hesitate to contact us.
10mm CCT 3 pin wire connector specification
| Designed for | 10mm CCT LED strips |
| Type | Click connector |
| Total length | 150mm |
| Voltage | 5-24V |
| Working temperature | 0~40℃ |
| Degree of protection | IP20 |
| Dimensions (mm) | L150 x W14 x H5 |
| Material | PVC |
| Weight | 5g |
| Storage temperature | -20~60℃ |
| Warranty | 2 years |
Leave a review