RGBW 10mm 5-pin wire connector
Our RGBW 5050 LED strip connection wire - 10mm is an easy way to connect your LED strip to e.g. RF controller. There is no need for soldering just open the cover and put the LED strip in "plug and play". Forget about throwing away offcuts! With our connector, you can use every little bit of your LED strip. Wires are soft and can be bent easily to adapt to your needs.
10mm RGBW 5-pin wire connector installation instructions:
• Ensure your section of LED light strip has five contacts (R G B W and +) and the contacts are clean
• Open the white clasp of the connector
• Insert the LED light strip into the clasp, under the prongs – making sure to match the + on the strip to the + on the clasp (black wire)
• Close the clasp
• Gently pull on the LED light strip to confirm you’ve made a solid connection
• Your connection is made!
Important!
Please make sure the width of your strip is 10mm as some of the RGBW strips are 12mm
Please check other LED strip accessories as well as other products available at our shop. In case you have any questions just contact us.
10mm RGBW 5-pin wire connector specification
| LED strip handling: | RGBW 10mm |
| Material: | Plastic |
| Dimensions(mm): | L160 x H5 x W20 |
| IP rating: | IP20 |
| Type: | RGBW 5050 |
| Warranty: | 2 years |
| Working temperature: | 0-40°C |
| Storage temperature: | -20 ~ 60°C |
| Wire length: | 150mm |
