2.4GHz colour temperature LED strip controller 12A (Upgraded)
The new CCT receiver 12-24V DC 12A is an upgraded Mi-Light dual white LED strip controller. This small size device is designed for controlling CCT LED lighting. The device is designed to change the colour temperature of the connected CCT LED tape by using a suitable dimmer. The connectivity of this device is done by radio. This receiver is compatible with the Mi-Light series.
The remote control or wall panel must be purchased separately. For compatible products please see the compatible MiBoxer products tab.
Application for installation: CCT - with variable colour temperature
Features of the Mi-Light 2.4GHz colour temperature LED strip controller 12A FUT035U
Application for variable colour temperature CCT tapes
Wireless communication with the dimming device
Get control of colour temperature and brightness
Works with Wi-Fi (optional)
Supports Voice control (optional)
Input voltage range 12-24V DC
Multiple receivers can be used in one zone
Maximum current carrying capacity 12A
The Mi-Light series is characterised by wireless radio communication with a remote control unit or wall panel. The range of this connection is 30 meters in the open area. Products that are compatible with the FUT035U receiver can be found in the compatible MiBoxer products tab.
Change the shade of white to suit your needs, choose cold white at working hours or warm white for the relaxing atmosphere of your dual-white LED strip. The device uses the most advanced technologies. It has a memory function (previous settings will be resumed in the re-supply). With technology 2.4G wireless remote control high frequency has the characteristics of low power consumption, long-range and has a strong anti-interference ability. The controller easily adapts to all types of multi white LED lights 12V-24V.
Mi-Light 2.4GHz colour temperature LED strip controller 12A FUT035U features
- Max. 12A output current
- Control systems, voltage 12-24V
- LED indication of power on the unit and the communication between the remote and the controller
- Operating temperature -20 to +40 degrees
Note: For remotely controlling of this Mi-Light controller a remote control is required. Alternatively, a WiFi bridge controller is needed to be able to control the lighting with the mobile phone via the free app.
Receiver power supply - connectors for easy assembly
Receiving devices are supplied with DC voltage of 12VDC or 24VDC, which must be supplied to the input of the device. In order to facilitate assembly, the construction of receivers consists of screw terminals, both at the entrance and at the exit, which makes it easier to bring the wires to the device. In addition, if you have a power supply that has a DC plug at the output, you can directly plug into the DC jack located next to the input terminals of the receiver. The cable connection is stable and quick to assemble.
Full control - cooperation with transmitting devices
Wireless radio route through which devices communicate provides a full range of possibilities related to control. Depending on the product, the control can be carried out with the help of many available radio remote controls operating on the 2.4 GHz frequency. This basic form of communication provides stable control of LED lighting within 30 meters in an open area. In addition, most products can be expanded with an alternative form of control, through the use of a Wi-Fi module, which allows you to connect our mobile application with a compatible device series Mi-Light. The transmitting devices cooperating with a given device can be seen above in the compatible MiBoxer products tab.
Mi-Light 2.4GHz colour temperature LED strip controller 12A FUT035U specification
||For installation with variable colour temperature CCT
|Maximum output current
|Input / Output Voltage
||12V DC or 24V DC
|Number of outputs
||2 outputs (WW/CW)– common anode
||up to 30 meters in an open area
||Wi-Fi with WL-Box1
||-20 – 60℃
||please see the compatible MiBoxer products tab
|Return to previous settings after power off
|Input connector (power supply)
||Screw terminals for bare wires and DC socket
|Output connector (signal)
||Screw terminals for bare wires
||L85 x W45 x H22.5
||RoHS, CE, UKCA
Mi-Light 2.4GHz colour temperature LED strip controller 12A FUT035U package includes
1 x LED WW/CW strip controller
1 x User manual (English)
1 x Double-sided adhesive pad