Mi-Light 2.4GHz manual & auto adjustable RGBW strip controller FUT028
The RGB+W 12-24V 10A Single Zone Controller is a ready-to-use product that allows you to wirelessly control RGB+W multicolour (eg RGB+W). This set is characterized by a remote control that allows you to control any brightness for each of the RGB LEDs. With this kit, you can get any colour from the RGB colour palette and turn on the colour of a single colour for the connected LED strip at any time. Connectivity is achieved through radio using a 2.4 GHz signal.
The set includes a radio remote control and one receiver.
Characteristic features of the Mi-Light 2.4GHz manual & auto adjustable RGBW strip controller FUT028
The total LED on/off
Dimming and brightening of the connected LED lighting
Brightness control for individual RGB LEDs
Active colour change from RGB colour palette
One colour (monochrome)
Active dynamic programs to use (change mode/speed)
Characteristics for the Mi-Light 2.4GHz manual & auto adjustable RGBW strip controller FUT028
Set for one zone (rooms)
Battery-operated remote (2x1.5V AAA)
Radio communication with the receiver (2.4GHz)
LED indication for remote operation
Works with Wi-Fi controller (optional)
Built-in dynamic programs to diversify multi-colour installations
Maximal current carrying capacity for receiver 10A
24 months warranty
Basic communication with the receiver is via radio. Optional Wi-Fi control, which lets you control your lighting with your mobile device (such as a smartphone or tablet), is available only through the appropriate Wi-Fi module (see the compatible MiBoxer products tab).
Wi-Fi capability
To access the control over the Wi-Fi network you need to purchase the appropriate module, which you will find in the "Related Products" tab.
Table 2. A detailed description of dynamic programs:
| Number |
Function |
Change of speed |
Changing the brightness |
| 1 |
Liquid brightening and dimming of white colour |
Possible |
Possible |
| 2 |
Smooth transitions between 3 RGB colours |
Possible |
Possible |
| 3 |
Dimming/brightening 3 RGB colours |
Possible |
Possible |
| 4 |
Jumping transitions between 3 RGB colours |
Possible |
Possible |
| 5 |
Jumping transitions between 6 colours |
Possible |
Possible |
| 6 |
Random colour transitions |
Possible |
Possible |
| 7 |
Liquid brightening and dimming of green and triple flashing |
Possible |
Possible |
| 8 |
Liquid brightening and dimming of green and triple flashing |
Possible |
Possible |
| 9 |
Smoothly brightening and dimming blue and triple flashing |
Possible |
Possible |
Great comfort - 16 million colours to drive
The construction of the Mi-Light series allows full access to the colour palette of up to 16 million colours. The colour tone in question depends on the precision of the control, which is usually achieved with the touch transmitter. The colours of the device are colourful and pleasant, and the effective colour rendering ratio allows you to fully enjoy the colourful mood of the room together with the Mi-Light series products.
The power supply of the receiver - connectors in the housing
Receiver units are supplied with a DC voltage of 12VDC or 24VDC, which must be connected to the input of the device. For ease of installation, the receiver design consists of screw terminals, both at the input and the output, which makes it easy to wire the device. Also, when you have a power supply that has a DC plug, you can connect directly to the DC jack located next to the input terminals of the receiver. The wiring is stable and quick to install.
Remote construction - control has not been so easy
Depending on the model of the transmitting device, which mainly occurs as a radio link to the receiver, various control functions can be obtained. The centrepiece of the dial or the rotating wheel for the dimmers is the main function of the particular change of colour or brightness. At the very top of the remote control, there are buttons that correspond to the operating mode of the unit, so be sure to turn on the remote control before the startup. The construction of the multi-zone remote control is simple, the buttons for the zone on / off are located at the bottom of the device stacked side by side so that access to them is convenient.
Mi-Light 2.4GHz manual & auto adjustable RGBW strip controller FUT028 specification
| Application |
For RGB+W installations |
| Number of supported zones/channels |
1 |
| The way of control |
radio |
| The way of control |
Buttons+touch wheel for changing colours |
| The range of radio communication |
up to 30 meters in the open area |
| Powering the remote control |
2 x 1.5V AAA battery |
| Signal modulation |
GFSK |
| Transmission type |
Two-way |
| Frequency of transmission |
2.4GHz |
| Power consumption in operating mode |
6dBm |
| Power consumption in standby mode |
20uA |
| Colour |
White |
| The degree of tightness |
IP20 |
| Remote dimensions |
52.5mm x 21mm x 120mm |
| The input/output voltage of the receiver |
12VDC or 24V DC |
| The maximum output current of the receiver |
10A |
| Number of receiver outputs |
4 outputs (R/G/B/W) - common anode |
| Frequency of the radio signal |
2.4GHz |
| Output signal |
PWM |
| Additional controls |
Wi-Fi module (see the compatible MiBoxer products tab) |
| Return to previous settings after turning off the power |
Yes |
| Working temperature |
-20-60°C |
| Input connector (power supply) |
Screw clamps for wires and DC socket |
| Output (signal) connector |
Screw clamps for wires |
| Dimensions of the receiver |
85mm * 45mm * 22.5mm |
| Declarations |
RoHS, CE, UKCA |
| Warranty |
24 months |
Mi-Light 2.4GHz manual & auto adjustable RGBW strip controller FUT028 package contains
1 x Remote control in a retail packaging
1 x RGBW receiver
1 x double-sided adhesive pad
1 x User manual
Leave a review