Product Name: RGBW Smart LED Control System
Model No.: FUT044A
Working Voltage: DC12V~24V
Output Max: 6A/Channel
Total Output Max: 15A
Working Temperature: -20~60℃
Max Controlling Distance: 30m
Output Connection: Common Anode
Controller Size: 37*28*97mm
Remote Size: 47*16.5*134mm
Mi-Light RGBW smart LED control system FUT044A
The RGB+W 12-24V 15A driver set is a ready product for wireless control of multicolour LED lighting along with white colour (e.g. RGB+W LED strip). The radio remote control allows you to obtain any RGB colour and white colour for the LED lighting used. Communication with the receiving device is carried out via a radio, which provides 30m wireless control in an area not exposed to interference. The set works with devices of the Mi-Light series.
Switching the zone on and off
Dimming and brightening the lighting assigned to the zone
The ability to control the colour
Obtaining the same monochrome colour (one colour)
Static colours to attach
Two-time modes of switching off LED lighting
Available dynamic programs that change the work characteristics
Changing the speed of dynamic programs being played
One zone for lighting
Battery-powered (2x AAA 1.5V)
Radio range up to 30 meters
Maximum load on the 15A receiver
Touch buttons
Wall holder for the remote control
Access to the installation of the mobile application (optional)
24 months warranty
Basic communication with receivers is carried out by means of radio. Obtaining an optional control by connecting to a Wi-Fi network, which enables the control of lighting with the help of mobile devices (e.g. smartphone or tablet), is available only after using the appropriate Wi-Fi module. When using more devices (receivers), we can create LED installations based on unlimited range, thanks to the technology of signal retransmission. The condition of such work is to place another receiving device within 30 meters.
Wi-Fi control is possible
In order to gain access to the control via Wi-Fi, you must purchase the appropriate module.
Table 1. Dynamic programs for the Mi-Light radio remote controller - FUT088
Number | Function | Change of speed | Changing the brightness |
---|---|---|---|
1 | Smooth transition between all colours | Possible | Possible |
2 | Smooth pulsation of white colour | Possible | Possible |
3 | Smooth transition between RGB colours | Possible | Possible |
4 | A jumping change of seven colours | Possible | Possible |
5 | A jumping change of random colours | Possible | Possible |
6 | Smooth pulsation of red colour ended with a triple flash | Possible | Possible |
7 | Smooth pulsation of green colour finished with a triple flash | Possible | Possible |
8 | Smooth pulsation of blue colour finished with a triple flash | Possible | Possible |
9 | The smooth pulsation of the white colour ended with a triple flash | Possible | Possible |
Panel construction - control has not been so easy
Wireless communication - radio route
The wireless radio route that these radio remotes have, provides comfortable control of LED lighting within 30 meters in an area not exposed to interference. Increasing the radio signal in the installation is possible by using several receiving devices assigned to one zone. These devices are characterised by the transmission of the received signal to the next device, thus increasing the control range of the LED installation (Distance between the receivers cannot be greater than 30m).
Delayed delay function - two operating modes
Another useful functionality that can be proud of these remotes from the Mi-Light series is undoubtedly the time mode responsible for switching off the LED lighting. This mode consists in turning off the lighting completely after one or ten minutes of time, thus ensuring that activities are carried out, such as comfortable leaving the room, when it is completely dark or dark outside. The advantage of such a solution is quick access to the mode, using the appropriate button located on the radio remote control.
Higher load capacity of outputs - more possibilities
The radio receiver was created in a way allowing to increase the maximum load capacity of the outputs. This means that in relation to previous Mi-Light series receivers, connecting more LED strips. In total, we can charge such a device with a current of 15A.
Mi-Light RGBW smart LED control system FUT044A specification
Application | For RGB+W installations |
Number of supported zones/channels | 1 |
The way of control | radio |
The way of control | Touch buttons + dial to change colours |
The range of radio communication | up to 30 meters in open terrain (an increase of range through signal retransmission) |
Powering the remote control | 2x pcs. 1.5V AAA battery |
Signal modulation | GFSK |
Transmission type | One-way |
Frequency of transmission | 2400-2483.5 MHz |
Power consumption in operating mode | 6dBm |
Power consumption in standby mode | 20uA |
Touch buttons | Yes |
Wall bracket | Yes |
Colour | White |
Remote dimensions | 47mm x 134mm x 16.5mm (width length height) |
The input/output voltage of the receiver | 12VDC or 24V DC |
The maximum output current of the receiver | 15A |
Number of receiver outputs | 4 outputs (R/G/B/W) - common anode |
Output signal | PWM |
Additional controls | Wi-Fi module (see the compatible MiBoxer products tab) |
Return to previous settings after turning off the power | No |
Working temperature | -20-60 ° C |
Input connector (power supply) | Screw clamps for wires and DC socket |
Output (signal) connector | Screw clamps for wires |
Dimensions of the receiver | 97mm * 37mm * 28mm |
Declarations | RoHS, CE |
Warranty | 24 months |
Mi-Light RGBW smart LED control system FUT044A package includes
1 x RGBW receiver in a retail packaging
1 x Remote controller
1 x Wall holder for a remote controller
1 x Manuals
2 x Screws
2 x Wall plugs
1 x Double-sided adhesive pad
Data sheet
- Supported Zones
- 1-zone
- Rated Power
- 180W/360W
- Light Colour
- RGBW
- Rated Voltage
- 12V
24V
- Features
- Dimmable
- Ingress Protection
- IP20
- Model Number
- FUT044A
- Certification
- CE
RoHS
- Warranty
- 2 years
- Light Source
- LED
- Communication Range
- 30m
- Communication Method
- Radio
- Pack Quantity
- 1
- Packaging
- Original retail colour packaging
- Instructions
- English
- Country/Region Of Manufacture
- China
- Type Of Material
- Plastic
- Colour
- White
- Battery Powered
- Yes
- Battery Type
- 2 x AAA
- Batteries Included?
- No
- Control Frequency
- 2.4GHz
- Current Type
- DC
- Power Source
- 12-24V DC
- Colour Changing
- Yes
- Class
- Lighting Remote & Control
- Unit Type
- Set
- Output Voltage
- 12V
24V
- Installation Area
- Indoor
- Control Style
- Remote Control
- Item Length
- 97mm
- Item Width
- 37mm
- Item Weight
- 0.159kg
- Item Height
- 28mm
- Mounting
- Free Standing
- Wholesale Box Quantity
- 60
Leave a review