Mi-Light 6W dual white LED light bulb FUT017
LED bulb CCT E27 6W 86-265V, is a monochrome LED bulb with the ability to change the colour temperature (from 2700K to 6500K) using the Mi-Light (radio remote control, wall panel or Wi-Fi module). The CCT 6W LED bulb is characterised by the high light output of 450-470lm depending on the colour temperature set and wireless control, which is carried out by 2.4GHz radio. It is adapted to the standard E27 thread.
The remote controller needs to be purchased separately. For compatible devices please see - Table 1
Features of Mi-Light 6W dual white LED light bulb FUT017
Adapted for thread E27
Possibility to change the colour temperature
Wireless communication with the controller (radio)
Get control over Wi-Fi (additional module)
Ecologically friendly LEDs based on SMD technology
Low power consumption
High durability of LEDs
The radio beam that uses the LED light to communicate with the Mi-Light controller provides full wireless connectivity at 30 meters. This is because the bulb has a built-in receiver for non-invasive connection. Optional control via Wi-Fi (for mobile devices), available only when using the appropriate Wi-Fi module (iBox1 or iBox2).
To access the control over the Wi-Fi network, you need to purchase the appropriate module, which can be found in Table No. 1.
Table 1. Compatible devices with Mi-Light 6W dual white LED light bulb FUT017
|Product code||Product name|
||Mi-Light 2.4GHz CCT full touch remote controller FUT093
||Mi-Light 2.4GHz 4 zone CCT remote controller FUT005
||Mi-Light 2.4GHz 4 zone rotating wheel remote controller FUT006
||Mi-Light 2.4GHz 4 zone CCT remote controller FUT007
||Mi-Light 2.4GHz dual full touch 4-zone remote controller FUT091
||Mi-Light 4 zone RGB+CCT smart panel remote controller B4
||Mi-Light 4-zone RGB+CCT smart panel remote controller T4
||Mi-Light WiFi iBox smart light iBox1
||Mi-Light WiFi controller iBox2
Colour adapted to the mood - colour temperature
CCT (Correlated Colour Temperature) allows you to change the colour temperature in terms of the different colour temperatures expressed in Kelvin [K]. For the Mi-Light series, this value oscillates at 2700K-6500K. The lower value allows you to obtain warm light, ideal for resting, while bringing your body into a relaxed mood, while the higher the colour temperature, the colder the light, which will vary in performance. The colour temperature is achieved quickly and remotely using the Mi-Light series controllers.
Full control - cooperation with broadcasting equipment
Each of the Mi-light LED driver series is characterized by the ability to assign not only one device to it. Built-in invisible underneath the electronics, it works on the principle of the receiver and thus connects to our LED driver. One zone in the remote control is also not an obstacle because we can assign to it many devices such as LED bulbs, downlights and receivers working with the model. Many devices do not interfere with each other and make this connection easy to use and easy to control. Above you will find a full table showing all the devices that work with your model
Entire room within reach of the hand - zone control
Some of the Mi-Light transmitters provide access to multiple zones fully controlled by one device. The use of such a method makes it easy to use the LED installation in a given room, allowing for future expansion of lighting at any time, when we do not need several zones in our installation, just another pairing of the connected receiver together with LED lighting with our device to the next zone. An interesting feature is the ability to program an unlimited number of receivers to a particular zone, in this case only the output parameters of the receiver.
Interior of LED lighting without secrets - construction of the device
Adapted to the standard E27 bulb thread, it has a housing that is made of polycarbonate (PC) material, which is covered with an inner aluminium layer, which absorbs the accumulated temperature, thus providing a longer life of the bulb. The electronics used in incandescent bulbs ensure stable operation of high-quality diodes, which are characterized by long life and large light output. The included inverter eliminates the flicker effect and does not expose our eyes to irritation and the milk shade made of acrylic glass effectively eliminates the glare and increases the safety when the bulb falls.
Mi-Light 6W dual white LED light bulb FUT017 specification
|Type of socket
|Light temperature range
||86-265V AC / 50-60Hz
|Nominal light output
|Colour rendering index
|Lamp power factor
|Remote control with
||Mi-Light remote control (see table #1)
||Up to 30 meters in open area
||See "Product description table 1"
||+/- 10% – 100%
||Internal aluminium casing
||L57 x W57 x H102.5
Mi-Light 6W dual white LED light bulb FUT017 package includes
1 x E27 CCT LED bulb in a retail box
1 x Manuals (English)