150 PREMIUM LED strip 20W/IP20 (600 lumen/m)
NEW PREMIUM 150 LED 20W strip without gel, with a standard degree of protection IP20 equipped with super strong 2835 diodes. LED strip manufactured and certified in POLAND
PREMIUM class tapes are a completely new quality of LED strips. Specially designed for the needs of the most demanding customers. It is characterized by the high quality of individual components and a solid PCB backing. Thanks to this, the tape will cope with even the most difficult working conditions. Modern diodes provide 100% more light than traditional tapes with the same power consumption!
A roll of tape 5 m long and 8 mm wide. The total power of the tape is 20W.
Power consumption depending on the length of the LED strip!
5m - 20W
4m - 17W
3m - 15W
2m - 10W
1m - 5W
One tape module is 10cm long, contains 3 modern 2835 LEDs. The tape can be cut every 10cm into sections of any length.
Available in 3 light colours to choose from:
cold white
warm white
neutral white
The LED strip is ideal for commercial lighting. It is characterized by a very large luminous flux of up to 600 lm/m.
Advantages of PREMIUM LED strips:
 | Modern Premium SMD LEDs! These are specially selected LEDs. They are characterized by uniform light colour along the entire length of the roll and very high luminous efficiency. As a result, we obtain an evenly dispersed glow of light with a uniform colour. Premium class LEDs are a guarantee of full luminous efficiency throughout the entire lighting period declared by the manufacturer. They emit twice as much light as standard LEDs with similar power consumption. |
 | Thick PCB underlay and reinforced paths! Premium tapes have twice the thickness of the PCB base, on which the LEDs are arranged stably and precisely. As a result, they dissipate heat faster and more effectively, which significantly extends the service life. That's why these tapes can shine for so long! |
 | Good quality resistors! Good resistors are of great importance for the life of the light source. In Premium tapes, the resistors have been selected so that the LEDs do not glow 100% of their capabilities! This solution allows the tape to shine the same for many years. Resistors of adequate capacity protect delicate LEDs against overload and damage. This is another important factor that improves the lighting quality of Premium tapes. |
Choice of light colour:
The info-graphics below presents a real photo of 3 connected sections of LED strips wrapped around a cylinder. Due to different technical parameters of monitors and colour profiles in graphic card settings, please treat as demonstrative information giving an idea of the difference in the colour of lighting. In fact, the colours may vary depending on the surroundings and the colour and structure of the illuminated surfaces.
Design Light PREMIUM LED strip 150 SMD 2835 20W IP20 specification
| Light colour: | warm white, neutral white, cold white |
| Power supply: | 12V DC |
| Colour temperature of the light: | 3000K, 4500K, 6000K |
| Luminous flux (meter): | 600 lm (+/- 10%) |
| Luminous flux (5 meters): | 3000lm |
| Number of LEDs (meter): | 30 |
| Number of LEDs (roll 5 meters): | 150 |
| Power (meter): | 4W (+/- 5%) |
| Power consumption (roll 5 meters): | 20W (+/- 5%) |
| Current (meter): | 0,16~0,2 A |
| Power consumption (roll 5 meters): | 0,8~1 A |
| LED type: | SMD2835 |
| Lighting angle: | 120° |
| Cutting section: | 10cm |
| PCB type: | flexible copper PCB laminate |
| Substrate colour: | white |
| Dimensions (width x height): | 8 x 2 (mm) |
| Lifespan: | 30,000 hours |
| Degree of protection IP: | IP20 |
| Lamp warm-up time to 60%: | 1s |
| Switching ON/OFF cycles: | 50,000 |
| Coefficient of luminous flux after 30,000 h of lighting: | 30% |
| Ignition time: | <0.5s |
| Lamp power factor: | ≥ 0.5 |
| Cooperation with a dimmer: | only with PWM dimmers |
| Weight with packaging: | 40g |
Design Light PREMIUM LED strip 150 SMD 2835 20W IP20 package includes
1 x 5m LED strip in a retail packaging
Leave a review