Design light set LED glass shelf clips
A custom set of LED glass shelf clips with a power of 0.75W per clip. This type of lighting is used mainly to illuminate glass shelves in sites, cabinets, barrows, cabinets, tables, displays, etc. The clip with minimal power consumption (one draws only 0.75W) gives fantastic illumination capabilities with built-in LEDs.
The recommended window thickness is 5-8 mm. The light emission angle is 60 degrees. Another advantage of the clip is the ability to control and change the lighting program using the RGB driver with remote control (not included). There are 20 programs available: 16 static and 4 dynamic modes.
This is a complete set that includes a 12V DC power supply and an RGB controller with a remote control to change the lighting program. All additional accessories such as extra clips, splitters, controllers, etc. are available in our store.
Light custom set LED glass shelf clips specification
| The colour of the binding | transparent |
| Voltage | 12V DC |
| Power consumption | 0.75W per clip |
| Colour of light | RGB |
| Degree of protection | IP20 |
| Dimensions (mm) | length 63mm / width 22mm / height 11mm |
| Energy class | A++ |
| Energy consumption kWh / 1000h | 0.75 kWh / 1000h |
| Luminous stream | 12lm per clip |
| Nominal shelf life | 30.000h |
| Number of on/off cycles | ≥15000 |
| Lighting time up to 60% of the full luminous flux | ≤1s |
| Cooperation with dimmers | YES |
| Place of application of the product | Internal use in a dry room. |
| The length of the wire | 2m cable ended with a mini RGB plug |
| Material | PVC |
| Light source included | YES |
Light for custom glass shelves includes
1 x IR remote controller with a 9-point splitter
1 x 3-pin wall plug power supply
custom amount of LED RGB glass shelf clips (amount of clips to be chosen from a dropdown list)
