2m RGB LED strip extension wire 10mm
10mm "CLIP" RGB LED strip connector with a 2m cable allows you to connect a 10mm RGB LED strip with a controller or power supply. Thanks to the use of this type of connector, we can easily and conveniently connect the LED strip to any device. The cable length is 2000mm.
It is designed for non-hermetic tapes (IP20) and hermetic tapes made in the (NANO) technology. The connector is not compatible with hermetic tapes with a silicone coating.
2m RGB LED strip extension wire 10mm installation instructions:
• Ensure your section of the LED light strip has four contacts (RGB and +) and the contacts are clean
• Open the white clasp of the connector
• Insert the LED light strip into the clasp, under the prongs – making sure to match the + on the strip to the + on the clasp
• Close the clasp
• Gently pull on the LED light strip to confirm you’ve made a solid connection
• Your connection is made!
Please check other LED strip accessories as well as other products available at our shop. In case you have any questions just contact us.
DESIGN LIGHT 2m RGB LED strip extension wire 10mm specification
| LED strip handling: | RGB 10mm |
| Material: | PVC |
| Dimensions(mm): | L2000 x H5 x W14 |
| IP rating: | IP20 |
| LED type: | RGB 5050 |
| Warranty: | 2 years |
| Working temperature: | 0-40°C |
| Storage temperature: | -20 ~ 60°C |
| Wire length: | 2000mm |
Leave a review