Mi-Light 40W 0/1~10V dimming driver PL1
This Mi-Light PL1 controller is a device designed to work with single-colour LED lighting. The device work in a 4-zone and 8-zone system and all the individual controllers can be grouped together. The PL1 LED controller allows for smooth regulation of the brightness of the white light. The working range of the device is 30-40V DC and the maximum power cannot exceed 900mA. This LED controller can be controlled via remote control or smartphone app (for the smartphone app control the additional WL-Box1 is required). Additionally, the LED controller has a function of auto-synchronisation and auto-transmission of the signal. Auto-transmission function allows extending the control range to an unlimited distance. For example, if you have just one controller you can control the lights from a distance of 30m but if you have 5 controllers and the distance between them is up to 30m then your last controller can be 150m away and you will still be able to control it thanks to the auto-transmission function. The Mi-Light PL1 LED controller has built-in additional inputs which allow controlling the controller directly from the appropriate dimmer (0-10V, 1-10V, 10V PWM) or a standard bell button.
The remote is not included and needs to be purchased separately. For compatible products please see the compatible MiBoxer products tab.
Application for installation:
MONO - single colour LED strips
Features of the Mi-Light PL1 receiver
Application for MONO installation
Alternative control methods (0-10V, 1-10V, 10V PWM)
Radio signal extension (signal retransmission)
Shared synchronization of devices in the installation
Input voltage range 30-40V DC.
Wireless communication with remote control
Additional potential-free input
Maximum current carrying capacity 900mA
Works with Wi-Fi (optional)
Possibility of creating a very large LED installation
The type of communication that connects the transmitter to the receiver is via radio. 2.4GHz frequency-based signal, allowing for 30m wireless operation in open areas. With more devices (receivers), we can create LEDs based on unlimited coverage, thanks to signal retransmission technology. The condition of this work is to place another receiver within 30 meters. Products that work with the PL1 receiver are listed in the compatible MiBoxer products tab.
Automatic synchronization - precision in operation
When more than one receiver is controlled by one transmitting device, the installation is synchronized during operation without causing delays during operation.
Transmission - transmitting the radio signal
Increasing the radio signal in the installation is possible with the use of several receivers. These devices are characterised by the transmission of the received signal to the next device, thereby increasing the range of control of the LED installation (the distance between receivers cannot be more than 30m).
Power supply - connectors for easy assembly
Receiver units are supplied with DC voltage of 12VDC or 24VDC, which must be connected to the input of the device. For ease of installation, the receiver design consists of screw terminals, both at the input and the output, which makes it easy to wire the device. Also, when you have a power supply that has a DC plug, you can connect directly to the DC jack located next to the input terminals of the receiver. The wiring is stable and quick to install.
Alternative control - enhanced functionality
Using additional control inputs, this is ideal for expanding our LED installation with additional control. In addition to the basic radio communication, we can get wired control over the voltage of 0-10V and 1-10V or also the frequency of the PWM signal (10V PWM). Receivers in their construction also have a potential-free input, allowing the user to connect a simple bell button. This type of receiver is primarily a function of LED installation.
Mi-Light 40W 0/1~10V dimming driver PL1 specification
| Application | MONO - single colour LED strips |
| Input/output voltage of the receiver | 30V DC or 40V DC |
| The maximum output current of the receiver | 900mA |
| Number of outputs of the receiver | 2 outputs - common anode |
| Number of receiver inputs | 3 + GND |
| Controlling method | Radio |
| Controlling range | up to 30 meters in an open area (possibility of signal extension by signal retransmission) |
| Model number | PL1 |
| Control frequency | 2,4GHz |
| Output signal | PWM |
| Additional control | 0-10V, 1-10V, 10V PWM, PushSwitch and Wi-Fi module (WL-Box1). |
| Working temperature | -20 – 60℃ |
| Return to previous settings when power is off | No |
| Colour | White |
| Product compatibility | please see the compatible MiBoxer products tab |
| Ingress Protection | IP20 |
| Dimensions[mm] | L279 x W30 x H21 |
| Certification | RoHS, CE, UKCA |
| Warranty | 2 years |
Mi-Light 40W 0/1~10V dimming driver PL1 package includes
1 x Mi-Light radio dimming receiver PL1
1 x User Manual (English)
Leave a review