Mi-Light 4-Zone CCT adjust smart panel B2
CCT - Mi-Light wall dimmer is a wireless wall panel that allows you to manage the brightness and colour temperature of a CCT for variable colour devices (eg CCT receiver/bulb or devices included in "Table 1"). The dimmer allows individual access for each zone, which can be controlled via the glass panel. The device is designed for surface mounting. The wall panel is powered by two 1.5V AAA batteries.
Application for installation: CCT - with variable colour temperature
Characteristic features of the Mi-Light wall panel - B2
Switching on or off the connected LED illumination
Enables and disables all zones simultaneously
Dimming and brightening of the connected LED lighting
Dimming and brightening of all zones simultaneously
Colour temperature change for all/individual zones
Immediate reduction of brightness (night mode)
Turn off the light with a 60-second delay
Features of the Mi-Light wall panel - B2
Four zones to use
Powered by two AAA batteries
Radio range up to 30 meters
Glass panel on the wall
Possibility of extension of the installation
Gentle LED illumination showing the work of the device
Construction suitable for surface mounting
24 months warranty
The wireless connectivity of the wall panel enables wireless control of up to 30 meters in open areas. Communication-based on 2.4GHz frequency provides stable and synchronised operation of the LED lighting used. Products that work with the B2 wall panel can be found in table 1 below.
Table 1. Compatible devices with Mi-Light 4-Zone CCT adjust smart panel B2
|Product code||Product name|
|| Mi-Light 4-zone colour temperature dual white LED strip controller FUT035
|| Mi-Light 5W GU10 dual white LED spotlight FUT011
|| Mi-Light 2.4GHz dual full touch 4-zone remote controller FUT091
|| Mi-Light 6W dual white LED light bulb FUT017
|| Mi-Light 9W dual white LED light bulb FUT019
|| Mi-Light 6W dual white LED downlight FUT060
|| Mi-Light 12W dual white LED downlight FUT061
|| Mi-Light WiFi iBox smart light iBox1
|| Mi-Light WiFi controller iBox2
Wall panel design - small touch, big possibilities
Mi-Light wall panels, differ in their design depending on the model presented. A coherent control element is the control element, which corresponds to a different function. In the centre of the wall panel, there is a button for turning on/off the connected LED illumination, brightness and colour temperature for the CCT controllers, using the touch control slider. The colour scheme of the RGB, RGB+W or RGB+CCT multicolour driver is the same, the change is achieved through the discs on which the individual colours or touch sliders are located. The rest of the buttons already refer to the specific features available for the model, as shown in the above image.
Glass touch panel - touch control
The glass touch panel in the Mi-Light series not only provides aesthetically pleasing appearance due to the absence of protruding buttons but also a full touch screen with touchpads for different functions depending on the model of the device. In addition to the glass wall panel, it has good protection for all kinds of minor scratches, so you get high durability for a long period of time.
Entire room within reach of the hand - zone control
Some of the Mi-Light transmitters provide access to multiple zones fully controlled by one device. The use of such a method makes it easy to use the LED installation in a given room, allowing for future expansion of lighting at any time, when we do not need several zones in our installation, just another pairing of the connected receiver together with LED lighting with our device to the next zone. An interesting feature is the ability to program an unlimited number of receivers to a particular zone, in this case only the output parameters of the receiver.
Full control - cooperation with receiving devices
Each of the Mi-light LED driver series is characterized by the ability to assign multiple devices to it. Built-in invisible underneath the electronics, it works on the principle of the receiver, thus connecting with our LED driver. One zone in the remote control or wall panel is also not an obstacle because we can assign many devices such as LED lamps, downlight luminaires and receivers working with the model. Many devices do not interfere with each other and make this connection easy to use and easy to control. Above you will find a full table showing all the devices that work with your model.
Mi-Light 4-Zone CCT adjust smart panel B2 specification
||For installations with variable colour temperature lights CCT
|Maximum output current
||Dependent on the receiver used
||2 x 1,5V AAA batteries (not included)
|The number of zones/channels supported
||1 to 4
||up to 30 meters in open area
|Power consumption in operating mode
|Power consumption in standby mode
||-20 – 60℃
|Type of installation
||See ,,Product description table 1"
||L86 x W86 x H21
Mi-Light 4-Zone CCT adjust smart panel B2 package includes
1 x Mi-Light 4-zone wall dimmer B2
1 x Plastic wall mount
1 x User Manual (English)