LED Line® Master Sensor PIR

LED line® Master Sensor PIR — Motion-Activated Lighting Control (12/24 V DC, IP20)

Automate indoor lighting with reliable PIR detection. The LED line® Master Sensor PIR switches your lights on when movement is detected and off after a short delay — perfect for hallways, wardrobes, cupboards, cabinets and display units. Its compact, discreet design integrates neatly into furniture and profile installations, cutting energy use by lighting only when needed.

Key features

• Advanced PIR technology: dependable, hands-free ON/OFF motion control.
• Wide coverage: up to 2.5 m range with a broad 120° detection angle.
• Dual-voltage: works with 12 V DC and 24 V DC constant-voltage LED systems.
• Ample capacity: up to 5 A load (≈ 60 W @ 12 V / 120 W @ 24 V).
• Compact & discreet: easy to conceal in cabinetry and aluminium profiles.
• Energy-saving: lights run only when motion is present.

Applications

• Wardrobes and closets for instant illumination.
• Hallways, landings and entryways for safer passage.
• Kitchen cabinets, plinths and worktop accent lighting.
• Retail displays, shelving and showcases.

Technical specification

What’s in the box

1 × LED line® Master Sensor PIR

Installation (summary)

1. Isolate the 230 V mains feeding your LED driver.
2. Wire the sensor inline between the constant-voltage LED driver (12/24 V DC) and your lights, observing + / − polarity.
3. Mount the sensor with a clear view of the target area; avoid aiming at heat sources or strong sunlight.
4. Restore power and test motion activation. Adjust position if required.

Note: This device provides ON/OFF control. For dimming, pair the installation with a compatible dimmable controller/receiver.

Recommended pairings

• LED drivers & power supplies — constant-voltage 12/24 V sized to your total wattage.
• LED strip lighting — choose brightness and colour temperature to suit.
• Aluminium LED profiles — tidy installs with diffusers.
• Smart lighting — expand your control options.

FAQs

Will it work on both 12 V and 24 V?
Yes — it supports constant-voltage 12 V or 24 V systems within the 5 A load limit.

Is it suitable for bathrooms?
It’s IP20 for indoor dry areas only. Keep out of splash zones or choose higher-IP sensors for wet areas.

Can I use it with dimmable setups?
The sensor switches ON/OFF. Use a compatible dimmable controller/driver if dimming is required.

Order now

Upgrade to contactless, energy-efficient lighting with the LED line® Master Sensor PIR. Shop at Future House Store for fast delivery and expert support.