MiBoxer 150W single colour dimming LED driver (WiFi+2.4G) WP1-P150V24
Dimmer with LED power supply (WiFi/BT/Tuya) - Mono - 24V 150W - 230V - WP1-P150V24, is a device that allows you to power low-voltage LED lighting (e.g. LED MONO strip) with access to dimming or brightening the connected light source LED. This is because the WP1-P150V24 device fulfils the role of both a constant voltage power supply with a rated voltage of 24V and an output power of 150W, as well as an LED dimmer that allows for smooth control of the brightness of, for example, a connected LED strip using a signal based on PWM control. Access to the WP1-150V24 power supply is carried out through the Tuya Smart mobile application, which uses wireless connections via a WiFi network or Bluetooth technologies and a built-in radio module enabling remote communication based on the 2.4GHz frequency. The range of such communication is 30 meters in the open area, but this signal can be retransmitted to another device, provided that it is within the range mentioned above. The device works with MiBoxer products.
The voltage power supply with LED dimmer also has unique features such as the ability to change the PWM frequency between high 8kHz and low 500Hz, which affects the functioning of the device. In addition, it has a dedicated input for the bell button, which performs the same work as the radio remote control or LED wall panel, allowing you to dim/brighten or turn on/off the LED lighting without the need for additional control devices. The power supply with dimmer WP1-P150V24 also has a compact casing with an IP67 degree of protection.
Application for installation:
MONO - single colour (monochrome)
Features of the dimmer with power supply - WP1-P150V24
It performs the functions of two devices - a power supply and a dimmer
Designed for monochrome LED installations
Power supply directly from the 230V mains
The output voltage of 24V
Maximum output power 150W
One channel to use
Control using the Tuya Smart application
Connectivity using WiFi/Bluetooth technologies
Remote communication based on the 2.4GHz frequency
Communication at the level of 30 meters in the open area
The ability to pass the signal to another device
Cooperation with radio remote controls and wall panels
Control via voice commands (additional option)
Additional input for the bell button
Hermetic housing with IP67 protection
Built-in diode signalling the operation of the device
Cooled by free air circulation
High quality of the components used
Small size with holes for permanent mounting
Leave a review