MiBoxer 100-Zone RGB+CCT Remote FUT100
The multi-zone LED radio remote control from the Mi-Light series is a hundred-zone LED controller that allows individual control of each zone using a radio receiver or other LED luminaire supported by the MiBoxer series. The radio remote control can be used for any LED installation because it provides the possibility of obtaining any RGB colour with an active change of brightness intensity and CCT colour temperature. This transmitter works with devices from the Mi-Light series (receivers, bulbs, downlights etc.). It has a wall bracket included.
An important feature of the controller is the possibility of using it for most LED installations because the receiving device can be designed for various lighting (MONO/CCT/RGB/RGBW and RGB+CCT). So far, it was necessary to decide whether the installation was to be single-colour or multi-colour, so an effective solution is to use a wall panel with a receiver designed for multi-colour installation with a variable colour temperature RGB+CCT.
Application for Installation
MONO - single-colour
CCT - with variable colour temperature
RGB - multicoloured
RGB+W - multicoloured with an additional white colour
RGB+CCT - multicoloured with variable colour temperature
Characteristic Functions of the Mi-Light Remote Control - FUT100
Dimming and brightening of connected LED lighting
Active colour change from the RGB colour palette
The possibility of switching on the white colour (when using RGB+W tape)
Control of the CCT colour temperature (warm and cold colour)
Controlling each zone separately
The function of enabling/disabling all zones at the same time
Immediate reduction of light intensity for zones/zones (night mode)
Active dynamic programs to be used (mode/speed change)
Change of saturation (RGB or RGB+W installation)
Save and read your favourite four scenes
Features of the 100-Zone MiBoxer Remote Control - FUT100
Support for up to one hundred zones
Applicable to all installations (Mono/CCT/RGB/RGB+W/RGB+CCT)
Radio communication with receivers (2400-2483.5MHz)
Built-in dynamic programs to diversify multi-colour installations
The possibility of expanding the installation at any time
Possibility to ignite a mixture of monochrome diodes in RGB colour mode
Quick access to your favourite arrangement via saved scenes
Intuitive and easy access to zones
A number of cooperating devices (LED luminaires, LED floodlights, LED bulbs)
Ability to copy a group of devices in a quick way
LED remote control lock function
LCD display showing the current parameters
The signalling diode indicates the work of the LED remote control
Wall mounting bracket
Compact size
The form of communication that connects the transmitter with the receiver is via radio. The signal based on the frequency of 2400-2483.5 MHz, allows for wireless operation of the installation at the level of 30 meters in an open area. With the use of more devices, we can create LED installations based on an unlimited range, thanks to the technology of signal retransmission. The condition for such work is to locate another receiving device within 30 meters. To increase the stability of the signal, you can also use a dedicated RP1 radio signal amplifier.
Leave a review