Mi-Light 4-zone RGB/RGBW smart panel remote controller T3
Wall-mounted 230VAC - 4 zone LED RGB/RGB+W Mi-Light is a wireless wall panel for brightness management with the ability to control a given RGB colour for multi-colour devices (e.g. RGB+W receiver). The controller is powered by a 230V AC power supply.
Application for installation
RGB - multicolour RGB+W - multicoloured with extra white
Characteristic features of the Mi-Light wall panel - T3
Switching on or off the connected LED illumination
Enables and disables all zones simultaneously
Dimming and brightening of the connected LED lighting
Dimming and brightening of all zones simultaneously
Achieve monochromatic colour
Colour capability for individual/all zones
Available dynamic programs to change the characteristics of the work
Change the speed of your dynamic programs
Features of the wall panel Mi-Light - T3
Four zones to use
Power supply directly from 230VAC
Radio range up to 30 meters
The glass panel on the wall
The possibility of extension of the installation
Sound signalling
Gently illuminates the button for lighting
Construction suitable for flush mounting - fi60 box
24 months warranty
The wireless connectivity of the wall panel enables wireless control of up to 30 meters in open areas. Communication based on 2.4GHz frequency provides stable and synchronized operation of the LED lighting used. Products that work with the T3 wall panel can be found in the compatible MiBoxer products tab.
Table 2. Dynamic programs for the Mi-Light 4-zone RGB/RGBW smart panel remote controller T3
| Number | Function | Change speed | Change brightness |
|---|
| 1 | Smooth transition between all colours | Possible | Possible |
| 2 | Single colour flashing | Possible | Possible |
| 3 | Pulses between three basic colours and white | Possible | Possible |
| 4 | Jumps between six colours and white | Possible | Possible |
| 5 | Jumps between random colour sequences | Possible | Possible |
| 6 | Red pulses complete with three flashes | Possible | Possible |
| 7 | Blue pulse with three flashes | Possible | Possible |
| 8 | Green pulse with three flashes | Possible | Possible |
| 9 | Several sequences combined in one dynamic program | Possible | Possible |
Wall panel design - a small touch, big possibilities
Mi-Light wall panels differ in their design depending on the model presented. A coherent control element is the control element, which corresponds to a different function. In the centre of the wall panel, there is a button for turning on/off the connected LED illumination, brightness and colour temperature for the CCT controllers, using the touch control slider. The colour scheme of the RGB, RGB+W or RGB+CCT multicolour driver is the same, the change is achieved through the discs on which the individual colours or touch sliders are located. The rest of the buttons already refer to the specific features available for the model, as shown in the attached image.
Glass touch panel - touch control
The glass touch panel in the Mi-Light series not only provides an aesthetically pleasing appearance due to the absence of protruding buttons but also a full touch screen with touchpads for different functions depending on the model of the device. In addition to the glass wall panel, I have good protection for all kinds of minor scratches, so you get high durability for a long time.
Entire room within reach of the hand - zone control
Some of the Mi-Light transmitters provide access to multiple zones fully controlled by one device. The use of such a method makes it easy to use the LED installation in a given room, allowing for future expansion of lighting at any time, when we do not need several zones in our installation, just another pairing of the connected receiver together with LED lighting with our device to the next zone. An interesting feature is an ability to program an unlimited number of receivers to a particular zone.
Full control - cooperation with receiving devices
Each of the Mi-light LED driver series is characterized by the ability to assign multiple devices to it. Built-in invisible underneath the electronics, it works on the principle of the receiver, thus connecting with our LED driver. One zone in the remote control or wall panel is also not an obstacle because we can assign many devices such as LED lamps, downlight luminaires and receivers working with the model. Many devices do not interfere with each other and make this connection easy to use and easy to control.
Mi-Light 4-zone RGB/RGBW smart panel remote controller T3 specification
| Application | For multi-colour installations with extra white RGB+W |
| Maximum output current | Dependent on the receiver used |
| Input voltage | 180-240V AC |
| The number of zones/channels supported | 1 to 4 |
| Modulation method | GFSK |
| Controlling method | Radio |
| Controlling range | up to 30 meters in an open area |
| Model number | T3 |
| Control frequency | 2,4GHz |
| Power consumption in operating mode | 5,5dBm |
| Power consumption in standby mode | 10uA |
| Working temperature | -20 – 60℃ |
| Type of installation | Flush mounting inside the fi60 box |
| Colour | White |
| Product compatibility | See the compatible MiBoxer products tab |
| Ingress Protection | IP20 |
| Dimensions[mm] | L86 x W86 x H33 |
| Certification | RoHS, CE, UKCA |
| Warranty | 2 years |
Mi-Light 4-zone RGB/RGBW smart panel remote controller T3 package includes
1 x Mi-Light 4-zone wall panel controller T3 in a retail box
1 x Rubber wall seal
2 x Screws
1 x User Manual (English)
Leave a review