|Mi-Light 12W RGB+CCT LED light bulb FUT105||+£32.40|
Mi-Light 2.4GHz 4-zone RGB+CCT remote controller FUT092
Product Name: 2.4GHz 4 Zone RGB+CCT Remote Controller
Model No.: FUT092
Voltage: 3V (section 2 batteries)
Transmission Frequency: 2.4GHz
Modulation Method: GFSK
Transmitting Power: 6dBm
Standby Power Consumption: 20uA
Control Distance: 30m
Mi-Light 2.4GHz 4 zone RGB+CCT remote controller FUT092
Innovative 4-zone LED radio remote control in the Mi-Light series, which allows individual control of each zone using the radio receiver. Characterised by full control of both the colour of the RGB colour palette as well as the active change of brightness and colour temperature CCT. This transmitter is compatible with the Mi-Light series (receivers, bulbs, downlights, etc.).
Receiver (s) must be purchased separately. Compatible receivers - (see Table 1).
Application for installation:
RGB+CCT - multicolour with variable colour temperature
Key features of the Mi-Light 2.4GHz 4 zone RGB+CCT remote controller FUT092
Dimming and brightening of the connected LED lighting
An active colour change from RGB colour palette
Possibility to turn white (using RGB+W strip)
Colour temperature CCT (warm and cold colour)
Control of each zone separately
Enables/disables all zones simultaneously
Active dynamic programs to use (change mode/speed)
Features of the Mi-Light 2.4GHz 4 zone RGB+CCT remote controller FUT092
Supports up to 4 zones
Application for RGBW+CCT strips
Radio communication with receivers (2.4GHz)
Works with Wi-Fi controller (optional)
Built-in dynamic programs that enrich RGB installations
Ability to extend the installation at any time
Ability to ignite blends of monochrome diodes in RGB colour mode
24 months warranty
The basic way of communicating receivers with the FUT092 transmitter is by radio, it is through which data transmission takes place, giving us the freedom to use the wireless LED driver. Optional Wi-Fi control, which lets you control your lighting with your mobile device, is available only through the appropriate Wi-Fi module.
Table 1. Compatible devices with Mi-Light 2.4GHz 4 zone RGB+CCT remote controller FUT092
|Product code||Product name|
|FUT105||Mi-Light 12W RGB+CCT LED light bulb FUT105|
|FUT012||Mi-Light 9W RGB+CCT LED light bulb FUT012|
|FUT018||Mi-Light 5W GU10 RGBW LED spotlight FUT018 warm white|
|FUT018||Mi-Light 5W GU10 RGBW LED spotlight FUT018 cold white|
|FUT062||Mi-Light 9W RGB+CCT LED ceiling spotlight FUT062|
|FUT063||Mi-Light 6W RGB+CCT waterproof LED downlight FUT063|
|FUT064||Mi-Light 9W RGB+CCT square LED downlight FUT064|
|FUT066||Mi-Light 12W RGB+CCT LED downlight FUT066|
|FUT067||Mi-Light 15W RGB+CCT LED downlight FUT067|
|FUT068||Mi-Light 6W RGB+CCT LED downlight FUT068|
|FUT069||Mi-Light IP54 waterproof 15W RGB+CCT LED downlight FUT069|
|FUT043||Mi-Light RGB LED strip controller FUT043|
|FUT044||Mi-Light RGBW LED strip controller FUT044|
|FUT045||Mi-Light RGB+CCT LED strip controller FUT045|
|FUTT07||Mi-Light 100W RGB+CCT LED floodlight FUTT07|
|FUTT06||Mi-Light 10W RGB+CCT LED floodlight 24V DC FUTT06|
|FUTT05||Mi-Light 10W RGB+CCT LED floodlight FUTT05|
|FUTT04||Mi-Light 20W RGB+CCT LED floodlight FUTT04|
|FUTT03||Mi-Light 30W RGB+CCT LED floodlight FUTT03|
|FUTT02||Mi-Light 50W RGB+CCT LED floodlight FUTT02|
|FUTC01||Mi-Light 9W RGB+CCT LED garden light FUTC01|
|FUTC02||Mi-Light 9W RGB+CCT LED garden light FUTC02|
|FUTC03||Mi-Light 15W RGB+CCT LED garden light FUTC03|
|LS2||Mi-Light 5 in 1 smart LED strip controller LS2|
|FUT037||Mi-Light 2.4GHz 4-zone RGB LED strip controller FUT037|
|FUT038||Mi-Light 2.4GHz 4-zone RGBW LED strip controller FUT038|
|FUT039||Mi-Light 2.4GHz RGB+CCT strip controller FUT039|
|FUT013||Mi-Light 5W E14 RGB+CCT LED light bulb FUT013|
|FUT103||Mi-Light 4W GU10 RGB+CCT LED spotlight FUT103|
|FUT104||Mi-Light 4W MR16 RGB+CCT LED spotlight FUT104|
|FUT014||Mi-Light 6W RGB+CCT LED light bulb FUT014|
|YL5||Mi-Light 5 in 1 WiFi LED controller YL5|
|YL1||Mi-Light touch RGB WiFi LED controller YL1|
Table 2. Dynamic programs for the Mi-Light 2.4GHz 4 zone RGB+CCT remote controller FUT092
|Number||Function||Change speed||Change brightness|
|1||Pulsating dimming/brightening of red||Possible||Possible|
|2||Smooth change of colours available from colour palette (RGB)||Possible||Possible|
|3||Liquid temperature change on white diodes (CW/WW)||Possible||Possible|
|4||Smooth change of brightness level of RGB+CW/WW LEDs (each is lit separately)||Possible||Possible|
|5||Dynamic colour change (red> green> blue> yellow)||Possible||Possible|
|6||An energetic and random variation of the colour palette||Possible||Possible|
|7||Smooth dimming of red, which ends with three flashes||Possible||Possible|
|8||Fluid dimming green, which ends with three flashes||Possible||Possible|
|9||Smooth blue dimming, which ends with three flashes||Possible||Possible|
Endless possibilities - great functionality
The rapidly evolving technology in the LED industry allows for incredible control and innovative solutions available at any time within the reach of our hands. Devices labelled RGBWW or RGB+CCT allow you to obtain each colour from the RGB palette with colour temperature CCT monochrome LEDs, both warm white and cold white. This solution allows the device to be adapted to the conditions of the room, making the product more practical. This feature is incredibly enjoyable, thanks to the well-designed LED drivers that allow you to wirelessly control your LED installation.
Great comfort - 16 million colours to drive
The construction of the Mi-Light series allows full access to the colour palette of up to 16 million colours. Obtaining a given shade of colour depends on the precision of the control, which is usually done with tactile transmitters. The colours of the device are colourful and pleasant, and the effective colour rendering ratio allows you to fully enjoy the colourful mood of the room together with the Mi-Light series products.
Remote construction - control has not been so easy
Depending on the model of the transmitting device, which mainly occurs as a radio link to the receiver, various control functions can be obtained. The centre of the touchscreen, the main function of the control, it is through it that we can change the colour or the brightness of the LED. At the very top of the remote control, there are buttons to enable/disable all available zones in our LED installation. Buttons for turning on/off the zone are located at the bottom of the device stacked side by side.
Entire room within reach of the hand - zone control
Some of the Mi-Light transmitters provide access to multiple zones fully controlled by one device. The use of such a method makes it easy to use the LED installation in a given room, allowing for future expansion of lighting at any time, when we do not need several zones in our installation, just another pairing of the connected receiver together with LED lighting with our device to the next zone. An interesting feature is the ability to program an unlimited number of receivers to a particular zone, in this case only the output parameters of the receiver.
Mi-Light 2.4GHz 4 zone RGB+CCT remote controller FUT092 specification
|Application for||RGB+CCT installation|
|Number of zones/channels supported||4|
|Controlling method||Buttons + colour wheel|
|Powered by||2 x 1.5V AAA battery|
|Type of transmission||One-way|
|Standby power consumption||20uA|
|Compatible with||Mi-Light RGB+CCT series (see table #1 for compatibility)|
|Method of communication||2.4GHz radio|
|Controlling range||up to 30 meters in open area|
|Degree of protection||IP20|
|Dimensions[mm]||L138 x W56 x H38|
Mi-Light 2.4GHz 4 zone RGB+CCT remote controller FUT092 package includes
1 x Remote controller FUT092 (batteries not included)
1 x User Manual (English)
- Rated voltage
- 2 x 1.5V
- Ingress protection
- Model number
- CE, RoHS
- 2 years
- Light source
- Housing colour
- Pack quantity
- Original retail colour packaging
- Country/Region of manufacture
- Type of material
- Power source
- Connected Home Compatibility
- Connected Home Protocol
- LED/RGB Controller
- Unit type
Our goal is to dispatch your online order as soon as possible but please allow several working days during sale periods for the shipment to leave our warehouses. Our cut-off point for same day dispatch is 3 pm.
We work with different carriers to provide the best, quickest option for all our customers.
1. All the orders are shipped as soon as possible and we aim to deliver them within 4-6 working days* in the United Kingdom, 4-10 working days in the rest of Europe and 7-14 working days in any other worldwide destination.
*If products are in stock and we have the capacity to dispatch your order earlier then your order may arrive within 1-2 working days.
There is no shipping cost for any order over £200 within the UK.
If you think that our shipping cost to your destination is too expensive, please get in touch with us and provide your delivery address so we can quote your order individually.
For more information about Delivery & Returns please visit our Delivery & Returns page.
If you have any question please don't hesitate to contact us.
Need a custom order?
Leave a review
You might also like
- Reduced price
- Reduced price