Mi-Light 4W GU10 RGB+CCT LED spotlight FUT103
This Mi-Light product is a multicolour RGB+CCT LED spotlight bulb with GU10 base. It can be controlled by Mi-Light remotes such as FUT092, FUT095, FUT096 or via your home Wi-Fi using devices that run Android or IOS systems (Mi-Light WiFi iBox is required as well as a mobile app that downloaded from our Download page). After pairing the app with the Mi-Light 4W GU10 RGB+CCT LED spotlight FUT103 you will be able to control up to 4 bulbs, change the colours by using a colour circle or a gravity ball in the app. You will be able to change the brightness, colour saturation or change the colour. This high-quality LED light bulb runs on AC 86-265V with 50-60Hz and spread the light in an angle of 25°. Mi-Light bulbs as a point of light can perform a variety of functions, including the main form for interior lighting and decorations. As with all good quality LED lights this bulb from the Mi-Light brand has a lifespan estimated at 50 thousand burning hours, which in practice gives even 25 years of a fully satisfactory environmental lighting product.
Features of Mi-Light 4W GU10 RGB+CCT LED spotlight FUT103
Adapted to the GU10 socket
Obtaining any colour from the RGB colour palette
Monochrome colour - warm or cold available at any time
Wireless communication with the controller (via radio)
Obtain control via Wi-Fi (additional module)
Light bulb adapted for 230VAC voltage
LEDs based on SMD technology
Low energy consumption
High durability of diodes
The radio route used by the LED bulb for communication with the Mi-Light controller provides a fully wireless connection at a level of 30 meters. This is because the bulb has a built-in receiver for a non-invasive connection. Obtaining an optional control by connecting to a Wi-Fi network (allowing the use of mobile devices) is available only after using the appropriate Wi-Fi module.
Wi-Fi control is possible
In order to gain access to the control via Wi-Fi, you need to purchase the appropriate module, which you can find in the "Related Products" or "see Table No. 1"
Table 1. Cooperating devices with LED bulbs - Mi-Light - FUT0103
Colourful comfort - 16 million colours to drive
Construction of Mi-Light series devices enables full access to the colour palette of up to 16 million colours. Obtaining a given shade of colour depends really on the precision of the control, which usually takes place using touch-sensitive transmitters. The colours obtained from the devices are colourful and pleasant, and the effective colour rendering index allows you to fully enjoy the colourful mood prevailing in the room together with the Mi-Light series products.
Full control - cooperation with transmitting devices
Wireless radio route through which devices communicate provides a full range of possibilities related to control. Depending on the product, the control can be carried out with the help of many available radio remote controls or wall panels operating on the 2.4 GHz frequency. This basic form of communication provides stable control of LED lighting within 30 meters in an open area. In addition, most products can be expanded with an alternative form of control, through the use of the Wi-Fi module, which allows you to connect our mobile application with a compatible device series Mi-Light. The transmitting devices cooperating with a given device can be seen above in the presented table or product parameters
The whole room at your fingertips - zone control
Some of the Mi-Light transmitting devices provide access to multiple zones, fully controlled by one device. The use of such a procedure greatly facilitates the use of a created LED installation in a given room while allowing future extension of lighting at any time when we do not need several zones in our installation, just another pairing of the connected receiver with LED lighting with our device receiver to the next zone. An interesting feature is the ability to program an unlimited number of receivers to a given zone, the condition, in this case, are only the output parameters of the receiver.
Endless possibilities - high functionality
The dynamically developing technology in the LED industry allows for amazing control and innovative solutions available at any time within reach of our hand. Devices marked with the symbol RGBWW or RGB+CCT allow you to obtain any colour from the RGB palette along with the CCT colour temperature of the monochrome LED, both in warm white and cold white. This solution allows you to adapt the device to the conditions in the room, making the product more practical. Obtaining such functions is extremely pleasant, thanks to interestingly designed LED drivers, allowing wireless control of the LED installation.
Mi-Light 4W GU10 RGB+CCT LED spotlight FUT103 specification
|Light temperature range
||86-265V AC / 50-60Hz
|Rated luminous flux
||250 - 280lm
|Substitute for a light bulb
|Colour rendering index
|Nominal beam angle
|Lamp power factor
||using the Mi-Light remote control
|The method of communication with the remote control
|The range of communication
||up to 30 meters in the open area
|Lamp designed for dimming
||+/- 10% - 100%
||internal aluminium housing
|The lamp is designed for accent lighting
|Level of security
|Declarations / Certificates
Mi-Light 4W GU10 RGB+CCT LED spotlight FUT103 package includes
1 x Mi-Light 4W GU10 RGB+CCT LED spotlight FUT103 in a retail box