Mi-Light 5 in 1 smart LED strip controller LS2
LS2 5 in 1 (15A) radio LED receiver is a product that enables wireless LED lighting control. The device is designed to be used in a variety of LED installations. Depending on the operating mode, the unit can work in monochrome and multicolour (RGB/RGB+W and RGB+CCT). Communication is done by radio and the basic radio range is 30 meters in the open, with the possibility of increasing it by retransmitting the signal.
One of the most important features of this receiver is the ability to use it for every installation (MONO/CCT/RGB/RGBW/RGB+CCT) with one remote control or wall panel. Up to now, for mixed installations in monochrome and RGB environments, separate sets have to be used for each. Using the LS2 receiver, you can control each installation by programming the LS2 receiver.
Remote need to be purchased separately. For compatible products please see Table 1.
Application for installation:
MONO - one colour CCT - with variable colour temperature
RGB - multicolour
RGB+W - multicoloured with extra white
RGB+CCT - multicolour with variable colour temperature
Features of the LS2 - Mi-Light receiver
Application for MONO/CCT/RGB/RGB+W/RGB+CCT installations
Radio signal extension (signal retransmission)
Shared synchronisation of devices in the installation
Input voltage range 12-24V DC.
Wireless communication with remote control
Maximum current carrying capacity 15A
Works with Wi-fi (optional)
Possibility of creating a very large LED installation
The type of communication that connects the transmitter to the receiver is via radio. A signal based on 2400-2483.5 MHz frequencies allows for 30 meters of wireless operation in open terrain. With more devices (receivers), we can create LEDs based on unlimited coverage, thanks to signal retransmission technology. The condition of this work is to place another receiver within 30 meters. Products that are compatible with the LS2 receiver can be found in the table below # 1 or in the "related products" category.
Table 1. Compatible devices with Mi-Light 5 in 1 smart LED strip controller LS2
|Product code||Product name|
||Mi-Light 8-zone RGB+CCT remote controller FUT089
||Mi-Light 8-zone smart panel remote controller B8
||Mi-Light WiFi iBox smart light iBox1
||Mi-Light WiFi controller iBox2
Automatic synchronisation - precision in operation
When more than one receiver is controlled by one transmitting device, the installation is synchronized during operation without causing delays during operation.
Transmission - transmitting a radio signal
Increasing the radio signal in the installation is possible with the use of several receivers. These devices are characterized by the transmission of the received signal to the next device, thereby increasing the range of control of the LED installation (distance between receivers cannot be more than 30m).
Multi-tasking mode in one device
Any type of LED can be used for this type of receiver. The device works with monochrome and multicolour lighting with variable colour temperature.
Mi-Light 5 in 1 smart LED strip controller LS2 specification
|Input/output voltage of the receiver
||12V DC or 24V DC
|Maximum output current
|Number of outputs of the receiver 5 outputs
||(R/G/B/CW/WW) - common anode
||up to 30 meters in an open area (possibility of signal extension by signal retransmission)
||-20 – 60℃
|Input connector (power supply)
||Screw terminals for bare wires and DC socket
|Output connector (terminal)
||Screw terminals for bare wires
||See "Product description table 1"
||L124 x W38 x H23
Mi-Light 5 in 1 smart LED strip controller LS2 package includes
1 x Mi-Light radio receiver LS2
1 x User Manual (English)